| Ofna truggy has a chassis 0.12" (3mm) thick aluminum hard coated kick up type with front and rear nylon braces. Engine .32 cu in (5.2cc) Ofna Force 32, pull start, slide valve carburetor, foam air filter and glow plug. Exhaust polished aluminum tuned pipe and header. Radio Ofna 2-channel AM transmitter and reciever with SX-002 high torque servo and SX-001 standard servo. Radio Box low profile nylon fully enclosed box. Shocks four aluminum threaded oil filled shocks w/white springs, 0.16" (4mm) thick aluminum shock towers. Fuel tank 5.1oz (150cc) flip top siphon type tank. Clutch 3-shoe, constructed of nylon. Transmission single speed. Main gear 62T steel spur gear. Differentials Front and Rear ring and pinion w/bevel gears, center bevel gear. Brake two fiberglass brake disks. Tires 5.5" (140mm) B-29 high traction race compound medium pin tires. Wheels white dish type w/17mm hex adapters. Body pre-painted stadium truck body w/tribal flame designs and heavy duty nylon racing wing. Caster front and rear adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis. Camber front and rear adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle. Suspension C-Hub. This kit includes one Mutilator Truggy, assembled rolling Chassis, .32 size engine with recoil, pre-installed radio system w/high torque steering servo, pre-painted body, pre-mounted tires on white dish wheels, aluminum threaded shocks, instruction manual and decals, glow starter and fuel bottle. |
