Ofna Sabre 1/8 Nitro Buggy 2.4GHZ Force .28 Pull Start OFN34932

Add $99.00 to receive Free Shipping...click for eligibility
reg $599.95

In Stock.

This item qualifies for BUNDLE & SAVE
This item qualifies for FREE SHIPPING
This is Ofna's Sabre 1/8 Scale Nitro Buggy with a 2.4GHz Radio and Force .28 Pull Start Engine included.


One Ofna X3 Sabre Off-Road Buggy with Force .28 Pull Start Engine, Ofna HNT-3 FHSS 2.4GHz Radio, Air Filter, Decals, Fuel Filter, Fuel Bottle, B4 Glow Plug, Body, Rear Wing, and an Instruction Manual


Eight AA Batteries for transmitter
Receiver Battery: 6-cell flat
Battery Charger: Compatible with receiver battery
Glow Fuel: Car blend with 15-30% nitro content (20% for break-in)
Glow Igniter, Maintenance and Track Equip.
Length: 18.1" (460mm)
Width: 11.8" (300mm)
Height: 5.5" (140mm)
Wheelbase: 12.6" (322mm)
Front Track: 12" (305mm) outer edges of wheels side-to-side
Weight: 7.4lbs (3356g)

Carburetor Settings
Needle Valve:
3 - 3-1/2 turns from closed, adjust for maximum RPM and power without being too lean or too hot
Low Speed Needle: Set needle to flush, turn clockwise to lean, or counterclockwise to richen. Do not adjust until needle valve is set for power and top speed
Barrel Stop Screw: Adjusts idle. Set for 1/16: gap to start new engine, open more for faster idle
  • Hard coated aluminum chassis, gun metal gray in color, nylon rear skid plate, plastic side rails
  • Four wheel drive shaft with front steel CVAs
  • Front center and rear differentials, bevel gear type, forged steel gears
  • .28 cu in (4.5cc) engine with slide valve carb, two-stage air filter, pull starter, 2.7HP @ 38,000RPM
  • Polished aluminum tuned pipe
  • 15T steel clutch bell
  • Ofna HNT-3 FHSS radio, with dual rate steering, and metal gear steering servo
  • Composite one-piece battery tray
  • Kingpin hub type front suspension, long front and rear arms with droop screws
  • Brake: Fiber dDisc
  • Oil-filled 16mm V2 shocks with hard coated aluminum bodies and soft rated pro springs
  • 7075 T-6 Aluminum shock towers, 0.16" (4mm) thick
  • Square pattern tires with foam inserts, outer diameter 4.48" (114mm) width, 1.6" (42mm)
  • Dish type yellow wheels, diameter 3.3" (83mm), width 1.6" (42mm), 17mm hexes
  • Molded polycarbonate body, trimmed and painted
  • Plastic black colored rear wing
  • Full set of rubber sealed ball bearings
  • 5oz (150cc) fuel tank with fuel filter
  • Adjustable caster/toe-in and camber
  • Ofna X3 Sabre Nitro

Review Summary