RPM's set of front A-arms coupled with rear A-arms, the total weight loss exceeds 24 grams or almost a full ounce! RPM accomplished this without creating any weak points nor are our A-arms any more flexible than the stock versions. Additionally, they have adjusted the shock mount locations slightly to allow more noticeable tuning adjustments when using the inner or outer shock mount holes (while the center hole remains in its stock location). While they were at it, RPM eliminated over 0.030" or 1/32" of slop from the inner arm mount and more than 0.010" or slightly less than 1/64"of slop at the outer hinge pin for an ultra-smooth, slop-free suspension system.
RPM A-arms for the electric versions of the Traxxas Rustler & Stampede are molded in either blue or black and are sold in pairs-1 left rear and 1 right rear per package.
Works good shock mounts a little ify.
Great product put them on all the rc's
That's about it. WOW!! Can't go wrong with RPM.
these are the best they havent broke and i had them 4 two years and hard bashing didnt even affect them
I replaced all the A-arms on my traxxas after one of the stock rears broke. They have proved to bet a great buy. I bash my car harder than most being here in Iraq and sence I put these on I haven't had one problem.
the blue look stylish while adding performance with less weight.
they don't look as nice as carbon fiber,but I've slammed my rustler into the curb and jumped it many times and nothing broke.