RPM bumper is thicker than the stock version and wider for 3-5/16” of front-end protection! The extra width of the bumper helps protect the fragile front shocks. These bumpers are not “bolt-on-over-the-stock” versions; our wide front bumpers completely replace the stock version.

The mounting screw holes are countersunk and recessed into the RPM wide front bumper preventing impacts from damaging the screw heads.

RPM nylons are much stronger than the stock material preventing the hinge pins from blowing out the side of the A-arm mounts.

RPM bumpers carry the RPM lifetime breakage warranty.

RPM tightened the tolerances for less suspension slop while still maintaining free motion of the A-arms.

RPM has reduced the front angle of the bumper from the stock 65 degrees to a more “bumper friendly” 35 degrees.