RPM Front/Rear A-Arms Slash 4x4/Stampede 4x4 Green RPM80704
RPM80704 RPM Front/Rear A-Arms Slash 4x4/Stampede 4x4 Green

RPM Front/Rear A-Arms Slash 4x4/Stampede 4x4 Green RPM80704

reg $11.95
$10.99

In Stock. Usually ships within 24 hours.

This item qualifies for FREE SHIPPING
Since the release of the Traxxas Slash 4x4, RPM customers flooded their e-mail in-box and called to let them know how badly they wanted RPM A-arms for these trucks. They’re here! RPM A-arms for the Traxxas Slash 4x4 are everything you’ve come to expect from RPM and more! Take a look at everything RPM has done:

Features:
  • Molded in RPM’s trademark blend of incredibly durable nylons
  • Drastically improve durability
  • Lightweight: RPM has cut 6.5 grams of weight off of each A-arm
  • Traditional look: 30 degree leading and trailing edges, and huge bosses for the shocks and sway bar mounts.
  • Designed, manufactured and produced in the USA
RPM has eliminated the slop in the suspension system, tightening the tolerances around the hinge pins, reduced the fore and aft movement of the A-arms at both the inner hinge pin and at the axle carriers by better than 90% and improved the durability dramatically (they’re made by RPM, enough said). As a bonus, RPM has cut 6.5 grams of weight off of each A-arm!

We can’t forget about how much better aesthetically the RPM versions look either. RPM A-arms carry over a traditional look with their 30 degree leading and trailing edges, and huge bosses for the shocks and sway bar mounts. Additionally, you now have the option of a bit of color with black, green or black to choose from.

RPM A-arms are molded in their trademark blend of incredibly durable nylons. Designed, manufactured and produced right here in southern California in the USA!

Note: RPM A-arms for the Traxxas Slash 4x4 & Stampede 4x4 are sold in sets of 1 – left and 1 – right A-arm in each package. Two packages will be needed to complete one truck. The upper hinge pin hole of the rear axle carriers cannot be used (not a stock location for the Slash 4x4 or Stampede 4x4) due to strengthening designs that reduce the clearance around the rear axle.

Includes: Two Front/Rear A-Arms

Requires: Installation at front or rear suspension
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at widest point
Thickness: 0.31" (8mm)
  • Traxxas Rally 1/10
  • Traxxas Slash 4X4 1/10
  • Traxxas Stampede 4x4 1/10

Review Summary

Reviews

5 Stars great

cody from CA wrote (October 01, 2013):

Great

5 Stars Hoping for less bench time and more fun

Greg from OH wrote (February 22, 2013):

These green a arms look sweet and so far so good