Our version of the Slash 4x4 body mount starts off lower than stock by 1/8 (or approx. 3.2mm). We supply a pair of molded spacers to allow you the option of a stock height body position using the thin spacer under the body mount. If monster suspension travel is needed or you just like the higher stance and larger wheel well openings a taller body mount provides, you can increase the height by 1/8 using the thicker of the two spacers. In extreme cases, both spacers may be used for a full 1/4* (6.35mm) of extra body height.
We weren't solely going for looks either. RPM body mounts are just plain tough! We engineered new, larger ribs into the mounts to provide extra rigidity and support for the body while keeping weight to a minimum. We mold these body mounts in black from our proven-tough blend of engineering-grade materials, which provides extra durability and impact-resistance in the most extreme situations.
What's Included: Each kit contains two body posts, one body mount bracket, two spacers and two M3 x 16mm mounting screws. Two kits will be needed to complete one vehicle.
Tech Notes: RPM Body Mounts for the Traxxas Slash 4x4 can be mounted in either the front or rear location on the truck.
* Using both RPM spacers requires longer screws (M3 x 20mm)not included.
Rpm parts are always a good idea, and these are no different. Tough as nails and look good!
Tried to utilize the adjustable mounts to give the highest clearance, but the screws holding it to the chasis are too short and the whole body with mounts went flying off the chasis during a race.
These work nicely.