Ram one tail strobe (w/clear lens). One red and one green wing tip lights. Comes completely pre-wired with power switch. Non-flashing.
In the center of this configuration is a circuit board. The length of the tail strobe wire from the circuit board is about 69". There is a "Y" in the wingtip strobe wire which occurs directly from the circuit board. The length of the wire from the circuit board to each of the tip lights are about 84". A 9V alkaline battery will provide many hours of operation and and result in the lowest possible system weight. A 6- or 7-cell NiCd pack may be used to light the system for extensive use.