*** New Waterproof Version ***Traxxas Velineon VXL-3S Electronic Speed Control.

Traxxas optional Pro Ball Bearing - Ball Differential for
MOST of the TRAXXAS R/C Cars and Trucks such as:
Nitro Hawk Bandit Hawk 2
Nitro Buggy Rad 2 Rustler
Nitro Street SRT Stampede
Slash *DOES NOT WORK IN NITRO STAMPEDE, NITRO RUSTLER OR NITRO SPORT*

Jaco pair of rear wheels with pink compound foam tires.

Jaco pair of front wheels with purple compound foam tires

Pro-Line's Road Rage Series has a low profile design for rapid response, captures today’s oversized wheel look, super soft M2 rubber, and a Readers’ Choice Award winning tread design, this is the 30 Series Road Rage. Complete with foam inserts, the Road Hawg tread excels on asphalt and concrete surfaces.

Traxxas pair of replacement front shocks for the Stampede and Rustler trucks. The shock bodies are made of black plastic and there are four spring pre-load spacers (to vary the spring tension) for each shock.

Traxxas pair of the black shocks XX long. These shocks are used on the rear of many Traxxas electric and nitro vehicles.

Traxxas grey lower chassis for the Electric Rustler Series.

Traxxas replacement lower chassis (or "tub" chassis) for the Rustler truck. It is made of black reinforced nylon and has a molded-in channel down the center of the chassis for added strength and less flex.

Traxxas optional aluminum idler gear for many vehicles. This idler gear works on these Traxxas vehicles as of the date of writing. Bandit, Rad 2, Rustler, Stampede, Nitro Street, SRT Nitro Buggy, Nitro Hawk, Hawk 2, Blue Eagle LS/LSII.

Traxxas decal sheet for the Nitro Rustler.

Traxxas set of replacement parts for the LS, LS-II, and Nitro Hawk.

Traxxas set of the telescoping drive shafts (equivalent of dogbones or swing shafts). These are for use on Traxxas trucks.

RPM rear A-arms for the electric versions of the Traxxas Rustler & Stampede are stronger and more durable than stock versions, but we’ve also managed to eliminate over 7 grams of weight per arm! That’s 14 grams of unsprung weight eliminated with a single pair of rear A-arms!

RPM rear A-arms for the electric versions of the Traxxas Rustler & Stampede are stronger and more durable than stock versions, but we’ve also managed to eliminate over 7 grams of weight per arm! That’s 14 grams of unsprung weight eliminated with a single pair of rear A-arms!

RPM front A-arms for the electric versions of the Traxxas Rustler,Stampede & Slash are built to withstand some of the toughest abuse. Incredibly, RPM was able to shave some unwanted unsprung weight as well. These are Black front A-arms for the Electric Stampede and Rustler.

RPM front A-arms for the electric versions of the Traxxas Rustler, Stampede & Slash are built to withstand some of the toughest abuse. Incredibly, RPM was able to shave some unwanted unsprung weight as well. These are Blue front A-arms for the Electric Stampede,Rustler, & Slash.

Traxxas Slash, Elec. Stampede, Rustler & Bandit Caster Blocks RPM Caster Blocks are the final link in for a complete, bulletproof front suspension from RPM for these Traxxas prroducts.

Traxxas left and right gearbox halves for the Rusler and Stampede truck kits.

Traxxas hop-up replacement shock caps (Big Bore) are designed to fit Big Bore shocks.

Traxxas set of rod ends, balls, and screws is used on all but four of Traxxas' kits. It WILL NOT WORK ON: the Sledgehammer, original Hawk, Cat, or Bullet.