SuperTigre G-3250 Airplane Engine Dual BB Schnuerle Giant Scale SUP11003522
SUP11003522 SuperTigre G-3250 Airplane Engine Dual BB Schnuerle Giant Scale

SuperTigre G-3250 Airplane Engine Dual BB Schnuerle Giant Scale SUP11003522

reg $399.99
$199.98

In Stock.

This item qualifies for FREE SHIPPING
This is the SuperTigre G-3250 Engine, which replaces the S-3000K.

Features:
  • Ball bearing-supported crankshaft (two bearings)
  • Aluminum Piston with piston ring
  • Better power-to-weight ratio than gasoline (Weed Eater) engines
  • Schnuerle Porting (AKA Schnuerle scavenging)
  • 3 Year Warranty

Includes:
One Radial motor mount (backplate mount), One Assembled G3250 Engine w/Carb, One Glow Plug (FOXG1400), One Instruction Set, Decals, and Parts List

Requires:

Propeller
Muffler
Fuel (at least 16% lubricants for break-in, after break-in, you can go down to 14%. 100% Synthetic or Synthetic/Castor will work.)
Bore: 36mm (1.417")
Stroke: 32mm (1.128")
Displacement: 32.61cc (1.989 cu in)
Power output: 3.2BHP @ 7,700
RPM range: 2,000-9,000
Weight w/o muffler: 1219 (43oz)
Width between centers of mounting holes: 64mm (2.52")
Length between centers of mounting holes: 23mm (.91")
Width of crankcase excluding mounting flanges: 54mm (2.13")
Length from backplate to front of drive washer: 142mm (5.59")
Height from bottom of crankcase to top of head: 137mm (5.39")
Crankshaft size: 10mm-1.25
Suggested prop size: 20x8, 18x8

Carb Settings

H-2-turns out from closed position.
L- Take carb off, rotate and look at bottom side.
Turn trottle until wide open, set tip of low end
needle half-way across cat eye.

Review Summary