This 2008 Super GT300 entrant, the Cusco Dunlop Subaru Impreza comes on
the fun to drive TT-01 Type-E chassis. Finishing the Super GT300 season
in 6th from a field of 28entrants, the Impreza showed its prowess at the
4th Round in Sepang where it started from pole position and went on to
claim the win. The Impreza also went on to record two more pole
positions in the wet at Round 6 in Suzuka and at Round 9 in Fuji. The
Impreza is powered by a Horizontally Opposed DOHC turbo charged
4-cylinder engine and is the only AWD race car in Super GT.
Features:
-
Chassis: TT-01 type E with shock tower now molded separately from the
gear case covers and new upper deck with transponder mount, new A parts
(Uprights) made of polycarbonate plastic material, new D parts (upper
deck, motor cover and more) made of fiberglass-reinforced nylon material
-
Drive: Four wheel shaft drive
-
Motor: 540 size with pre-attached leads
-
Electronic Speed Control: Tamiya TEU-101BK
-
Lights: Tamiya TLU-01 (TAMC1394) LED light unit with four LED lights
-
Shocks: Friction, not oil-filled, composite body
-
Gearbox: Sealed front and rear
-
Differentials: Bevel gear
-
Transmission: Single speed
-
Tires: Racing slicks 1.02" (26mm) wide, 2.48" (63mm) diameter
-
Wheels: 10-spoke plastic 1.02" (26mm) wide, 2.04" (52mm) diameter, gray in color
-
Body: Lightweight polycarbonate, requires trimming and painting injection molded side mirrors and rear wing
-
Bumpers: Foam front bumper
-
Suspension: Four wheel independent double wishbone
-
Camber: Non-adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
-
Steering Tie Rods: Fixed non-adjustable, caster/toe-in refers to the
angle of the front suspension when viewed from the side of the car in
relation to the chassis
-
Steering: Bell-crank TA-05 type with servo saver
-
Servo Saver: Included
The polycarbonate body accurately captures the impressive form of the Impreza. Chassis features of TT-01 type E with shock tower now molded separately from the gear case covers and new upper deck with transponder mount, new A parts (Uprights) made of polycarbonate plastic material, new D parts (upper deck, motor cover and more) made of fiberglass-reinforced nylon material.
Includes: Tamiya Cusco Dunlop Subaru Impreza, friction shocks, 540 motor, electronic speed control, clear body, tires, foam bumper, wheels, 19 tooth pinion gear, 61 tooth spur gear, instructions, LED light unit, window mask and body trim decals
Requires:
Radio: 2-channel with one steering servo
Battery: 6 cell stick pack with standard connector
Charger: AC/DC Timed or Peak for 6-cell battery
Misc: Polycarbonate safe paint, building & track equipment
Vehicle
Length: 17.5" (444mm)
Width: 7.4" (187mm)
Height: 5.2" (132mm)
Body
Length: 17.3" (440mm)
Width: 7.7" (195mm)
Height: 4.4" (111mm)
|
Cars & Trucks
Airplanes
Helicopters
Boats
