Tamiya Nissan Fairlady Z Ver Nismo TT-01E 1/10 On-Road Car Kit TAM58402

Add $99.00 to receive Free Shipping...click for eligibility
reg $266.00

Out of Stock.

This item qualifies for BUNDLE & SAVE
This item qualifies for FREE SHIPPING
Tamiya already released as a 1/24 scale static model, the sleek Fairlady Z Version NISMO is now released as an R/C model on the latest "Enhanced" version of Tamiya's widely popular TT-01 chassis, the TT-01 type E.

The TT-01E is a new chassis derived from the original TT-01; upgraded with some redesigned parts for structural rigidity and maintenance ease. The shock towers are now molded separately from the gear case covers. There is a new upper deck design along with a new TA-05 inspired steering system that reduces slop.

Includes: Tamiya Nissan Fairlady Z, friction shocks, 540 motor, electronic speed control, clear body, tires, foam bumper, wheels, 19 tooth pinion gear, 61 tooth spur gear, instructions, LED light unit, window mask and body trim decals

Radio: 2-channel with one steering servo
Battery: 6 cell stick pack with standard connector
Charger: AC/DC Timed or Peak for 6-cell battery
Length: 17.1" (435mm)
Width:  7.5? (190mm)
Height: 5.5? (140mm)
Weight: 2.4lbs (1100g)

Length: 16.6" (422mm)
Width: 6.7" (172mm)
Height: 3.8? (98mm)
  • Chassis: TT-01 type E with shock tower now molded separately from the gear case covers and new upper deck with transponder mount new A parts (Uprights) made of polycarbonate plastic material new D parts (upper deck, motor cover and more) made of fiberglass-reinforced nylon material
  • Drive: Four wheel shaft drive
  • Motor: 540 size with pre-attached leads
  • Electronic Speed Control: Tamiya TEU-101BK, TAMM3194
  • Lights: Tamiya TLU-01 (TAMC1394) LED light unit with four LED lights
  • Shocks: Friction, not oil-filled, composite body
  • Gearbox: Sealed front and rear
  • Differentials: Bevel gear
  • Transmission: Single speed
  • Tires: Radial type 1.02" (26mm) wide, 2.48" (63mm) diameter
  • Wheels: 5-spoke silver plastic 1.02" (26mm) wide, 2.04" (52mm) diameter
  • Body: Polycarbonate, requires trimming and painting
  • Bumpers: Foam front bumper
  • Suspension: Four wheel independent double wishbone
  • Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
  • Steering Tie Rods: Fixed non-adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
  • Steering: Bell-crank TA-05 type with servo saver
  • Servo Saver: Included

Review Summary