| FEATURES: Chassis: Plastic tub TT-01 design Drive: Four wheel shaft drive (drive shaft is made of plastic) Motor: 540 motor with pre-attached bullet connectors Bushings: Plastic and metal Shocks: Friction, plastic body Gearbox: Sealed, front and rear Differentials: Bevel gear Transmission: Single speed Tires: 2.6" (65mm) outer diameter, racing slick type Wheels: Six spoke, 2" (51mm) outer diameter, gunmetal color Speed Control: Mechanical- 3 speed forward, 1 speed reverse with standard connector Bumpers: Foam front bumper Suspension: Fixed non-adjustable Camber Tie Rods: Fixed non-adjustable, 3 part (Camber is how the tires sit vertically) Steering Tie Rods: fixed non-adjustable (Caster/Toe-in is how the tires point inward as viewed from above) Steering: bell-crank type Servo Saver: included INCLUDES: Raybrig NSX rolling chassis with friction type shocks, 540 motor, mechanical speed control, clear body, tires, foam bumper, spoke wheels, 19 tooth pinion gear, 61 tooth spur gear, decal sheet and instructions. _ REQUIRES: Radio: 2-channel with 2 standard servos Radio Batteries: 8 AA size Battery: 6 flat pack with standard connector Charger: AC/DC timed or peak for 6-cell battery Paint: Paint for a lexan body Misc. Items: building and track equipment SPECS: VEHICLE- Length: 18" (457mm) Width: 7.9" (202mm) Height: 4.3" (110mm) Weight: 2.2lbs (990g) kit only 3.3lbs (1490g) with battery, speed control, motor and radio equipment Wheelbase: 10.1" (257mm) Tread: Front- 6.3" (159mm) Rear- 6.2" (157mm) side-to-side at wheel centers Ground Clearance: 0.35" (9mm) Gear Ratio: 8.35:1 Tires- Width: 1" (26mm) Wheels- Width: 1" (26mm) Inner Diameter: 1.8" (46mm) Diameter: 1.9" (47.5mm) Outer Diameter: 2.6" (65mm) BODY- Length: 18-2/8" (460mm) Width: 7-1/2" (190mm) at rear wheels (widest point) Height: 4-1/4" (110mm) COMMENTS: For Replacement Ball Bearings use: Qty. Size Location Bearing Set Qty. 12 5 x11mm front & rear diff gears, hubs (use 6) 4 8 X12mm front & rear diff gears (use 2). |
