| FEATURES: Chassis: Plastic tub TT-01 design Drive: Four wheel shaft drive Radio: Tamia Expec TTU-03 AM pistol-grip w/servo reverse, steering and throttle trims and standard servo Motor: 540 motor with pre-attached leads Ball Bearings: Installed in differentials, bushings in wheel hubs Shocks: Friction, plastic body Gearbox: Enclosed, front and rear Differentials: Bevel gear, ball bearing equipped Transmission: Single speed Body: 0.03" (0.8mm) polycarbonate, painted and trimmed Tires: 2.6" (65mm) outer diameter 1" (26mm) wide racing radial type Wheels: Silver 5-Spoke 2" (51mm) outer diameter Speed Control: TEU-101BK electronic, w/reverse & standard connector Bumper: Foam front bumper Suspension: Fixed, non-adjustable Camber Tie Rods: Fixed, non-adjustable, Steering Tie Rods: Fixed, non-adjustable Steering: Bell-crank type Servo Saver: Included INCLUDES: Tamiya Enzo Ferrri on-road car, pistol-grip transmitter, receiver, 540 motor, ESC, painted body, tires, foam bumper, spoke wheels wheels, 19 tooth pinion gear, 61 tooth spur gear and instructions REQUIRES: Radio Batteries: 8 AA size (for transmitter) Battery: 6 flat pack with standard connector Charger: AC/DC timed or peak for 6-cell battery Misc. Items: Building and track equipment SPECS: VEHICLE- Length: 15.3" (389mm) Width: 7.25" (184mm) Height: 5.75" (146mm) Weight: 2.2lbs (990g) kit only 3.3lbs (1490g) with battery, speed control, motor and radio equipment (approximate) Wheelbase: 10.1" (257mm) Tread: Front- 6.3" (160mm) Rear- 6.4" (162mm) side-to-side at wheel centers Gear Ratio: 8.35:1 Tires, F&R: Overall Diameter, 2.6" (65mm) Overall Width, 1" (26mm) Inner Bead Diameter, 1.9" (48mm) BODY- Length: 17.6" (447mm) Width: 7.6" (194mm) Height: 4.50" (114mm) COMMENTS: For Replacement Ball Bearings use: Qty. Size Location Bearing Set Qty. 12 5 x11mm front & rear diff gears, hubs, 4 8 X12mm front & rear diff gears. Body is painted red with mirrors, body trim and Ferrari decals. |
