Tamiya XV-01 Pro Chassis 1/10 On-Road Car Kit TAM58526

Add $99.00 to receive Free Shipping...click for eligibility
reg $463.00

In Stock.

This item qualifies for BUNDLE & SAVE
This item qualifies for FREE SHIPPING
This is the 1/10 scale Tamiya XV-01 Pro Chassis Kit. This Chassis is Tamiya’s common all-terrain platform that can be used for on-road cars, rally cars, and pickup trucks.

This is Tamiya’s Pro-spec version of their R/C 4WD XV-01 chassis. "XV" stands for "Crossover Vehicle". Just like the name says, this vehicle is intended to serve as a common all-terrain platform that can be used for rally cars, on-road cars, and pick-up trucks. This chassis comes equipped with covers to protect the drivetrain and R/C units from dirt and debris and its suspension provides a ground clearance of over 10mm. The motor is mounted at the front and power is delivered via a drive belt to the front/rear gearboxes that are equipped with gear differential units.

One Tamiya XV-01 Pro Chassis Kit with Shocks, Shock Oil, Tires, Foam Inserts,
Wheels, Decals, Spur Gear, Pinion Gear and Instruction Manual

Radio: 2-channel
Motor: 540 size
ESC: To match selected motor
Battery: 7.2V 6-cell stick pack with Standard connector
Building and track equipment
Length: 15.1" (384mm)
Width: 7.3" (185mm)
Wheelbase: 10.1" (257mm)
  • Molded plastic chassis with front and rear wheel well liners for protection against mud and debris
  • Four wheel reinforced belt drive
  • Bevel gear differentials
  • Long tie-rod steering system to reduce bump steer, high torque servo saver
  • Double wishbone, reversible rear suspension for off-road driving and toe angle setting changes
  • Full set of ball bearings
  • TRF plastic body, oil filled shocks
  • Battery access hatch on underside of chassis
  • All terrain rubber tires 1.02" (26mm) wide, 2.6" (65.4mm) diameter with foam inserts
  • 16 spoke white plastic wheels, 1" (25.4mm) wide, 1.9"(48mm) diameter, 12mm hex
  • Adjustable camber, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
  • Adjustable caster, front and rear caster/toe-in refers to the angle of the suspension when viewed from the side of the car in relation to the chassis
  • Front, urethane foam bumper
  • 68 tooth plastic spur gear
  • 22 tooth steel pinion gear

Review Summary



nealkumar from CT wrote (March 03, 2014):

this thing is engineered perfect. It is called xv-01 "PRO" for a reason. great time putting it together and driving it. i love this thing. a lot of small peices though