Team Durango DEX408 1/8 Electric 4WD Off-Road Buggy TDRTD102007

Add $99.00 to receive Free for eligibility
reg $699.99

Out of Stock.

This item qualifies for BUNDLE & SAVE
This item qualifies for FREE SHIPPING
This is the Team Durango DEX408 1/8 Scale Electric 4WD Off-Road Buggy.

The Team Durango DEX408 was specifically engineered and designed for the emerging and exciting class of 1/8 scale electric off-road buggy racing. With conscious consideration of the specific weight distribution requirements, the DEX408 makes no compromises; there are no short-cuts. If you're serious about 1/8 scale off-road buggies, the Team Durango DEX408 should be your only choice.

Of course the internal components of an electric buggy are quite different to those of a nitro buggy, so it follows that the weight distribution of the components needs to be calculated, considered, tested and proven. That is exactly what Team Durango did with the DEX408. In order to achieve optimum weight distribution (with a near perfect 50/50 front-to-rear), they decided to keep the chassis narrow, while still allowing more than enough room for many of today's most popular electronics. With a narrow chassis design, the DEX408 is nimble like its smaller DEX410 cousin, and it's easy to wrench-on in-between races.

All Team Durango cars have a certain look; their low, flowing lines have become a hallmark of Team Durango's racing heritage. The DEX408, with its sculpted, streamlined bodyshell and lightweight molded rear wing make it not only stunning to drive, but striking to look at. RC off-road doesn't have to be ugly; fast can be beautiful, and the Team Durango DEX408 is both.

One Team Durango DEX408 Buggy Kit with Body, Rear Wing, Wheels, Decal Sheet, Differentials and Shock Oil, Threadlock and Instructions

Motor: Brushless, at least 1800kV
Radio: 2-channel with high torque steering servo
ESC: To match selected motor
Batteries: Two 2S 7.4V LiPo, at least 5000mAH
Tires: 1/8 scale buggy with foam inserts
Battery Charger: LiPo compatible
Pinion Gear: 5mm, number of teeth to be determined by motor and gearing requirements
Building and track equipment
  • Rear wheel drive
  • 15mm Big Bore aluminum bodied shocks, oil filled
  • Composite Spur Gear, 60 tooth 1M
  • Battery Compartment is in the center of chassis, hook and loop battery straps for ROAR legal (and larger) stick or saddle pack batteries up to 1.4" (35mm) thick
  • Clear polycarbonate buggy body with black plastic rear wing
  • Adjustable front and rear camber
  • Adjustable caster/toe-in
  • Aluminum Chassis, 0.12" (3mm) thick, with composite plastic side rails
  • Bevel gear differentials
  • Aluminum shock towers, 0.20" (5mm) thick
  • Composite suspension arms with front and rear sway bars
  • Dish type wheels, white in color, 1.7" (42.3mm) wide, and 3.2" (80.5mm) diameter
15.9" (405mm)
Width: 11.9" (302mm)
Wheelbase: 12.8 - 13.1" (325 - 333mm)
Internal Gear Ratio: 3.31:1
Weight: 119.9oz (3400g)

12.7" (322mm)
Width: 6.4" (162mm)
Height: 3.5" (90mm)
  • Durango DEX408 4WD Buggy Kit
  • Durango DEX408 4WD Buggy

Review Summary