Tekin 1/10 RS Gen2 Spec ESC 17.5 RPM Gen2 Motor TEKTT2431
TEKTT2431 Tekin 1/10 RS Gen2 Spec ESC 17.5 RPM Gen2 Motor

Tekin 1/10 RS Gen2 Spec ESC 17.5 RPM Gen2 Motor TEKTT2431

Add $99.00 to receive Free Shipping...click for eligibility
reg $330.00

In Stock.

This item qualifies for BUNDLE & SAVE
This item qualifies for FREE SHIPPING
This is Tekin's 1/10 scale RS Gen2 ESC and 17.5 RPM Gen2 Sensored Brushless Motor Combo.

Programming Features:

  • Brake / Reverse Strength (13 steps)
  • Neutral Width (13 steps)
  • Custom Throttle Curves
  • Voltage Cutoffs (none, 2S, 3S, Custom)
  • Extensive Tuning via Tekin HotWire PC Interface
  • Save, Load and Share custom ESC setup files*
  • Drag Brake (13 steps)
  • Current Limiter (none + 12 steps)
  • Adjustable Throttle and Brake Minimums
  • Motor/Reverse Type: Brushless, Brushed, No Rev, Rev Delay
  • ROAR Race Spec "Blinky" Mode
  • Hotwire Programming Option*
  • Save, Load and Share Data Log files*

  • Ultra-smooth and Precise Throttle and Braking Control
  • Easily Access Programming, Anywhere, Anytime
  • EZ Access HotWire Programming Port
  • D2: Dual Drive Mode Technology
  • HDAC: High Density Copper PCB's
  • Gold-plated Solder Posts for Easy Wire Replacement
  • Pit Tune Mode
  • QuickTune Programming
  • One-Touch Radio Calibration
  • ROAR Spec Mode only, no Timing features
  • Compatible with Sensored/Sensorless Brushless and Brushed Motors
  • Datalogging Capability
  • HotWire PC Interface for Advanced Programming and Updating
  • On-Board Temperature Indicator
  • Sensor Plug for Precise Commutation with all Motors
  • Self Test Diagnostics and Factory Reset
  • DGF2: Digital Glitch Filtering V2

The RS GEN2 SPEC was designed and engineered for Spec racing and provides you with professional performance at an extremely affordable price. The RS SPEC brings flawless operation and racer-friendly tuning to the world of Spec racing. True ROAR Spec mode only, no timing or boost features are available.

Packed with new features, the Tekin RS GEN2 SPEC provides an EZ Access Port for Data Logging and HotWire communication capabilities in a small sized package. Rated for 17.5 turn motors and higher, the GEN2 is the perfect ESC for both new and experienced racers. Couple the RS GEN2 SPEC with a Redline GEN2 brushless motor for the ultimate package in Spec racing equipment.

Note: *Requires HotWire Sold Separately
Input Voltage: 4-9 Cells, 2S-3S LiPo
BEC: 6.0v 3.7amps
Motor Limit Brushless Mode: 13.5 Turn, 540 2-pole (36mm)
Motor Limit Brushed Fwd Only Mode: 20 Turn Silver Can
Motor Limit Brushed Fwd/Rev Mode: 20 Turn Silver Can
Brushed Modes: Fwd Only, Fwd/Rev, Rev Delay
Brushless Modes: Fwd Only, Fwd/Rev, Rev Delay
Dimensions: 1.0 x 1.3 x .51in (25.4 x 33 x 12.9mm)
Weight: .80oz / 22.5g

6.2oz (177g)
Rotor: 12.3mm
Shaft Dimensions: 3.2mm (1/8") x 15.3mm
Motor Diameter: 35.85mm / 1.40"
Motor Length: 51.8mm / 2.03"

Review Summary