Tekno RC EB48.2 4WD 1/8 Electric Buggy Kit TKR5002
TKR5002 Tekno RC EB48.2 4WD 1/8 Electric Buggy Kit

Please Note: Color and/or graphics may differ from image shown

Tekno RC EB48.2 4WD 1/8 Electric Buggy Kit TKR5002

Add $99.00 to receive Free Shipping...click for eligibility
reg $900.00

Out of Stock.

This item qualifies for BUNDLE & SAVE
This item qualifies for FREE SHIPPING
This is the Tekno RC EB-48.2 4WD 1/8 Electric Buggy Kit.

One Tekno RC EB-48.2 4WD 1/8 Electric Buggy Kit with Body, Rear Wing, Motor Mount, Shocks, Shock and Diff Oil, Decals and Instruction Manual


Radio: 2-3 channel with high-speed steering servo (also, standard servo if using brake)
Motor: Brushless type designed for 1/8 scale buggies
Pinion Gear: Mod 1, Tekno RC 11 - 30t recommended
LiPo Battery: One 4S or two 2S
Tires: 1/8 scale buggy
Wheels: 1/8 scale buggy
Battery Charger: For selected LiPo battery
Paint, tools and track equipment
17.1" (435mm)
Wheelbase: 12.7-13.2" (323-335mm)
Width: 12" (306mm), 12.2" (310mm) with optional hubs
Weight: 7.5lbs (3400g) with common electronics and options
Diff Ratio: F/R 10/40t, Center 44t
Battery Tray Dimensions: 1.96 x 5.8" (50 x 148mm) 2x2s or 1x4s config

13"  (330mm)
Width: 5"  (127mm)
Height: 3.1" (80mm)
  • Chassis is made of CNC aluminum, 0.16" (4mm) thick, super narrow design-widest point is 125mm, less than 5" from mudguard to mudguard, short chassis overhang provides better bump handling and jump landing, gun metal gray in color
  • Four wheel drive shaft, CV driveshafts with captured pins
  • Two-piece CNC aluminum motor mount with dual clamping gear mesh adjustment, lightweight direct to diff mount design accommodates truggy or long can motors up to 3.1" (78mm) long
  • Three lightweight fluid filled bevel gear type differentials, updated low wear cross pin design, new ring and pinion gears for smoother operation
  • Battery Tray is sunken into chassis for super low center of gravity; tray accommodates one 4S or two 2S LiPo packs
  • Shocks are 16mm big bore, oil filled, CNC threaded shock bodies, caps, cartridge caps, and adjustment nuts, 4mm hardened steel polished shafts, options for vented cap, emulsion, or standard shock configurations, updated internals to minimize shaft deflection
  • Shock Towers are CNC aluminum, 0.20" (5mm) thick
  • Clear polycarbonate buggy body, with white plastic high-downforce wing
  • Suspension is made up of an adjustable front arm sweep and angle, equal length front and rear sway bars, adjustable length arms to suit any track conditions, updated front and rear XT arms
  • Narrow pivot steering posts provide zero bump geometry with nearly zero slop, CNC aluminum Ackerman plate rides on 4 precision bearings, adjustable bump-steer and Adjustable caster/toe-in
  • Adjustable front and rear camber

Review Summary