This is the 1/10 scale Tekno RC SCT410 4WD Short Course Truck. The SCT410 shares many parts with the groundbreaking 1/8 scale Tekno EB48 Electric Buggy, so you know it will be able to carve up the track and take a beating.
There are many new parts on the Tekno SCT to keep weight to a minimum, including new lighter steering blocks, arms, rear hubs, spindle carriers, and an all new lightweight drivetrain. Add a front/rear bumper system and some sturdy adjustable body mounts and you have the SCT that everyone has been waiting for – true 1/8th scale roots with 1/10th scale weight and agility.
Standard 12mm hex wheels bolt right on (SCTE offset) and existing 7.4v SCT power systems will have no trouble pushing the SCT410 around the track.
Super narrow layout, the widest point is only 125mm (less than 5 inches) mudguard-to-mudguard.
Lightweight, afjustable body mounting system fits on most popular SC bodies (Losi, AE, etc.).
Integrated battery tray/mud guard; battery is sunken into chassis for a super low Center of Gravity.
Enclosed, spacious, easy access radio box with integrated transponder mount.
4mm black anodized CNC 7075"aluminum chassis.
Class leading front and rear clearance (short chassis overhang) gives you better bump handling and jump landing.
Extremely durable and lightweight front and rear bumper system
Integrated electronics tray/mud guard for easy removal of electronics
Adjustable chassis brace system for fine tuning flex with front, center, and rear braces
Uses a standard MOD 1 pinion.
Lightweight direct-to-differential mount design.
2-piece CNC aluminum motor mount with precision dual clamping gear mesh adjustment.
Differentials and Drivetrain:
Newly redesigned precision differential gears with unique cross-pin design for improved durability
Straight center driveline for reduced wear and maximum efficiency
Standard 12mm hexes fits on most popular SC wheels (SCTE offset).
3 fluid filled adjustable super lightweight differentials.
Less rotating mass = better acceleration.
CV driveshafts with captured pins on all 4 wheels.
4mm 7075"aluminum shock towers come standard.
Fully adjustable long travel suspension geometry maximizes stability and traction while providing superior cornering and on-power steering.
4mm hardened steel polished shafts.
Triple guide design for true consistent shaft action.
Optional springs and sway bars available.
16mm bore hard anodized shocks – Biggest-in-class!
Unique conical piston design (not just tapered) provides varied compression and rebound rates.
CNC aluminum threaded shock bodies.
Options for vented cap, emulsion, or standard shock configurations out of the box.
Suspension and Steering:
Adjustable length rear arms to suit any track condition.
Front and rear arms can be used on either side = less parts in your toolbox.
Adjustable hinge pin braces are standard (toe, anti-squat, kick-up, front arm sweep).
Adjustable Ackerman and bump-steer (bump in, 0 bump, bump out).
Steering system is fully supported on precision ball bearings. No bushings here.
Bulletproof suspension arms – thicker and stronger than the competition.
Adjustable front arm sweep and angle to make the car more aggressive (swept forward), or easier to drive (swept back).
‘Narrow pivot’ steering posts provide ‘0 bump’ geometry with almost 0 steering slop.
4mm inner, 3.5mm outer hinge pins, polished for smooth action.
LCG rod ends and lightweight turnbuckles.
Front/rear sway bars are the same length = less parts in your toolbox.
2 channel radio/transmitter
ESC and Pro4 SCT motor
High torque steering servo
2s LiPo battery
SC tires, wheels (SCTE offset) & CA glue
SC body of your choice, paint for body
Hex tools (1.5, 2.0, 2.5"m), nut drivers (5.0, 5.5, 7.0mm), pliers, other tools
Weight: ~3000g (6.6lb) out of the box RTR
Diff Ratio: F/R ? 10/40t, Center ? 44t spur
Battery tray dimensions: 50 x 148mm
- Easily adjust anti-squat, rear toe, front arm angle, front arm sweep, roll center, toe, camber, wheelbase, rear arm length, Ackerman, bump steer, suspension geometry out of the box.
- Shares many parts with your EB48 1/8th Electric Buggy = less parts in your toolbox.
- All metric hex hardware.
- Exceptional wear characteristics. Leave the slop and warping to the other guys.
- Extremely easy to work on with minimal screw count.
- 100% Tekno RC Designed and Tested in Southern California.