We took our revolutionary Electri-Clutch system and expanded it into the most flexible power delivery option available for 1/8th scale electric vehicles.
* Instant power, zero lag
* Improves traction in all conditions (indoor/outdoor)
* Allows the use of motor brakes or mechanical brakes
* Lowers temps on motor and ESC
* Protects your drivetrain under acceleration AND braking
* Allows reverse
* Adjustable (different springs provide different slip settings)
* Inexpensive (doesn't cost as much as a whole conversion kit)
* Super long wear 7075 clutch shoes (we're talking months and months)
* BACKWARDS COMPATIBLE WITH ALL TEKNO KITS!!!
Now Tekno RC has EVERYONE covered. If you want direct drive and motor brakes - CHECK! If you want clutch and mechanical brakes - CHECK! If you want direct drive and mechanical brakes - CHECK! All this with better traction and drivetrain protection.
Here's how it works - our Elektri-Clutch system works similar to a traditional nitro clutch where the springs 'PULL' the shoes to the center. The Traktion Drive employs a new clutch shoe design coupled with a different spring design to 'PUSH' the shoes into the clutch bell. So it's engaged at 0 RPM. This equals 0 lag.
Slip amount is adjusted by the thickness of the springs. Use lighter springs (0.8mm, 0.9mm) for better traction on loose tracks. Use thicker springs (1.0mm, 1.1mm) for higher grip tracks.
Tekno RC continues to push the boundaries of the evolving 1/8th brushless class. The new Elektri-Clutch adapter is compatible with most 3-shoe clutch systems and clutch bells (Ofna, Mugen, Kyosho, AE, Hot Bodies, etc). This adapter is lighter, stronger, spins truer, and is easier to set up than the previous design.
Includes Tekno RC's new line of quick engaging springs (TKR4107, TKR4108) and 7075 clutch shoes (TKR4105). The 0.7mm - 0.9mm springs will allow you to tune the power and responsiveness of your brushless system. The 0.7mm springs engage almost instantly and provide a true bridge between direct drive and clutch systems. The hard 7075 aluminum clutch shoes have a machined shim on top and bottom of each shoe to allow free/consistent engagement. All the benefits of both systems are achieved: Instant power, better traction, cooler operating temps, predictable jumping (no nose diving), smoother faster cornering, less drivetrain stress. No compromises.