Thunder Tiger ST-1 4WD 1/8 .28 Nitro 2.4G IFHSS Org/Blue TTR6233-F101

reg $649.99
$449.97

Out of Stock.

This item qualifies for BUNDLE & SAVE
This item qualifies for FREE SHIPPING
This is the Thunder Tiger ST-1 4WD 1/8 scale Nitro Stadium Truck with an Orange and Blue Painted Body, Pro-28BX-R .28 cu in (4.6cc) Engine with pull starter, and Ace Cougar P3 3-channel 2.4GHz radio.

Includes:
One 1/8 scale Thunder Tiger ST-1 4WD Nitro Stadium Truck with an Orange and Blue Painted Body, .28 cu in engine with pull starter, glow plug, air filter, tuned pipe, 2.4GHz radio, high-torque steering servo, tires, wheels, foam inserts, decal sheet, wrench, and instruction manual

Requires:
Fuel: 20% lubricant and 10-30% nitro content, synthetic/castor blend lubricant recommended (do not use more than 10% nitro content for break-in)
AA Batteries: 8 for transmitter
Receiver Pack: 6V, hump configuration
Building and track equipment
Features:
  • Chassis is made of 0.14" (3.5mm) thick aluminum, is gun metal gray in color and has composite side guards
  • Four wheel shaft drive with front ball type universal drive shaft
  • 46 tooth metal spur gear
  • Thunder Tiger Pro-28BX-R .28 cu in (4.6cc) engine with pull starter, glow plug, 2 needle slide valve carb, and foam air filter
  • Anodized aluminum tuned exhaust pipe that's been polished to a natural finish
  • Dual disc fiber brake
  • Three shoe, composite clutch
  • 13 tooth steel clutch bell
  • 50T steel main gear
  • 5oz (150cc) fuel tank
  • Ace Cougar P3 3-channel 2.4GHz radio with high-torque steering servo and the transmitter has charge jack
  • Bevel steel gear differentials
  • Ball bearing equipped bellcrank type steering with servo saver
  • Oil-filled aluminum bodied shocks, 3.5mm shafts
  • Aluminum 0.16" (4mm) thick shock towers
  • Trimmed and painted body with a blue and orange color scheme
  • Nine spoke chrome wheels
  • Tires with cube pattern tread and foam inserts
  • Full set of ball bearings
  • Tuned pillow ball front suspension, 3.5mm diameter front and rear sway bars, and extra long/ rigid suspension arms for superior handling and better cornering
  • Adjustable caster, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
  • Adjustable front and rear camber, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
  • Warranty (through the manufacturer): Thunder Tiger guarantees this buggy to be free from defects in both material and workmanship. This warranty does not cover any components damaged by use or modification. A part or parts missing from the kit must be reported within 60 days of purchase. No part or parts will be sent under warranty without proof of purchase
Vehicle
Length:
19" (485mm)
Width: 14.8 - 15" (375 - 380mm)
Height: 7.17" (182mm)
Wheelbase (adjustable): 13.7 - 14.4" (349 - 365mm)
Ground Clearance: 1.9" (48mm)
Weight: 8.6lbs (3920g)

Body
Length:
18.8" (479mm)
Width: 8.2" (209mm)
Height: 4.9" (125mm)

Wheels
Hex:
17mm
Width: 2.2" (55mm)
Diameter: 3.34" (85mm)

Tires
Width:
2.4" (62mm)
Diameter with foam inserts: 5.25" (133mm)

Track Width
Front (adjustable):
13.1 - 13.4" (335 - 340mm)
Rear: 13.4" (340mm), track is the measurement from the outer edges of the wheels side-to-side

Review Summary