Thunder Tiger line 53H Helicopter Engine TTR9606
TTR9606 Thunder Tiger Redline 53H Helicopter Engine

Thunder Tiger line 53H Helicopter Engine TTR9606

reg $299.99
$229.98

In Stock. Usually ships within 24 hours.

This item qualifies for FREE SHIPPING

Thunder Tiger RL-53H engine features XC2 extreme composite coating with nano-technology from Japan for longer engine life, a special criss-cross pattern etched on the sleeve wall for much lower friction and an oversized heat sink head. These exclusive RL-53H's features deliver much more reliable power and higher torque through the full range of RPM.

The brand-new carb design is mounted on the crankcase with a very effective heat insulator to keep the carb working at stable temperature under all conditions.
Features

Designed for stable hovering and aerobatic 3D flights
XC2 (extreme composite coating) cylinder liner with special criss-cross pattern etched
Precisely-balanced crankshaft with Ni plating to further reduce corrosion
Knife-edged design & high-strength connecting rod with bushings pre-installed
Lightened hypereutectic machined Al-Si ringed piston
Machined over-sized heat sink head
Reinforced resin rear cage ball bearing support
State-of-the art CNC machined components
Non-seizing flange mount carburetor with thermo insulator
Push-pull throttle lever
2 Needle valves adjusted with both Hex and FT driver at same side
High performance Redline R3 glow plug included

Displacement: 0.529 cu.in
Bore: 0.886in
Stroke: 0.858in
Practical RPM: 2,000-21,000 RPM
Output: 2.1 BHP @17,000RPM
Weight: 13.4oz (380g)
Includes: RedLine R3 glow plug

Review Summary