Thunder Tiger Pro .46M 2-Stroke Inboard Marine Engine TTR9554
TTR9554 Thunder Tiger Pro-46M

Thunder Tiger Pro .46M 2-Stroke Inboard Marine Engine TTR9554

Add $99.00 to receive Free Shipping...click for eligibility
reg $239.99
$169.98

In Stock.

This item qualifies for FREE SHIPPING

All major components are machined from the highest quality materials and subjected to rigorous quality control checks to deliver fantastic reliability and enormous power output.
Features

Side exhaust
ABN construction : Aluminum piston with Nichel-plated brass cylinder liner
Hyperutectic machined Al-Si ringed piston
High strength connecting rod with bushings pre-installed
SG crankshaft for clutch system
Water-Cooled Cylinder Head
One-piece crankcase with squared-off cooling fins
Dual ball bearing-supported crankshaft
2 Needle valves carburetor
9mm carb bore
Vertical mounted main needle valve
State-of-the-art CNC machined components
Redline R2 glow plug included

Displacement: 0.455 cu in (7.47cc)
Bore: 0.858" (21.8mm)
Stroke: 0.787" (20mm)
Practical RPM: 4,500 - 24,000
Output: 2.46 HP @ 23,000 rpm
Weight: 12.35oz (350g)

Carburetor Settings
Needle Valve: 3 turns counterclockwise from closed
Mixture Metering Screw: After setting needle valve, set mixture screw flush with the end of the spray bar and then turn upward about two turns
Height from Mounting Tab Bottom/Top of Cylinder Head: 2.7" (70.1mm)
Height from Crankcase Bottom to Top of Cylinder Head: 3.5" (88mm)
Width at Mounting Tabs: 1.9" (50mm)
Width of Crankcase below Mounting Tabs: 1.3" (33mm)
Center of Mounting Holes Same Side: 0.71" (18mm)
Center of Mounting Holes Opposite Side: 1.6" (42.9mm)
Center of Crankcase to Front Bearing: 2.04" (51.7mm)
Distance from Backplate to Front Bearing: 3.01" (76.4mm)

Note: The carburetor is preset from the factory and requires only small adjustments

Review Summary