Thunder Tiger Sparrowhawk DT12 EP 4WD 1/12 2.4GHz Orange TTR6568-F082

Add $99.00 to receive Free for eligibility
reg $549.99

In Stock.

This item qualifies for BUNDLE & SAVE
This item qualifies for FREE SHIPPING
Thunder Tiger 1:12 SPARROWHAWK DT12 4WD EP Short Course Truck is another offroad machine configured for totally intense driving. Built for panicking the competition off the tracks, the DT12 delivers fantastic performances in a RTR package boasting some very serious first-rate parts and features: composite tub chassis with countersunk battery tray, cast aluminum motor plate & mount, Ripper IBL 36/39-540C brushless motor, reinforced steel gear differentials and ultra-long racing suspension arms have to give the DT12 a winning advantage.
Radio-wise, the DT12 is equipped with the Cougar PS3 2.4G radio system for straight out of the box dirt trails and total shameless arrogance.

AA Batteries: Eight for transmitter
Battery: 7.2V 6-cell NiMH stick pack with Standard connector OR 7.4V 2S LiPo pack
Battery Charger: Compatible with selected battery
Phillips screwdriver and track equipment
16.73" (425mm)
9.84" (250mm)
6.10" (155mm)
Ground Clearance:
1" (25mm)
10" (255mm)
49.38oz (1400g)
Gear Ratio:
Distance from center of tires side-to-side
8.97" (228mm), Rear, 8.85" (225mm)

Length: 17.5" (444mm)
Width: 7.7" (197mm) behind front wheels, narrowest point 9.3" (236mm) at rear wheels, widest point
Height: 4.5" (114mm)
  • 100% factory-assembled chassis w/ printed Lexan body
  • Composite tub chassisw/ countersunk battery tray
  • 4WD shaft driven off-road short course truck
  • Front and rear universal (CVA)
  • 4 oil-filled coil over shock absorbers w/ aluminum caps
  • Standard competition slipper clutch
  • Full ball bearings on axles
  • Cast aluminum motor plate and mount
  • Ultra long racing suspension arms
  • Hardened-steel gear differentials
  • Hardened-steel adjustable turnbuckles and steering tie rods
  • Race ready glued wheels and tires
  • ACE RC Cougar P3i 2.4GHz digital pistol radio system
  • ACE RC BLC-40C brushless electronic speed control
  • RIPPER brushless motor IBL36-540C 3900Kv
  • Fully upgradeable with hop-ups
  • Chassis: Composite tub chassis with countersunk battery tray
  • Drive: Four wheel shaft with front and rear universals
  • Motor: Ripper 3900kV brushless with 20 tooth steel pinion gear
  • Motor Mount: Cast aluminum with cooling fins
  • Main Gear: 72 tooth composite
  • Radio: Ace Cougar PS3i 2.4GHz three channel with standard steering servo
  • ESC: Ace BLC-40C 40A amp
  • Body: Painted and trimmed Lexan with body trim decals
  • Differentials: Hardened steel planetary gear type
  • Shocks: Oil-filled, composite body
  • Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
  • Camber: Adjustable front and rear, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
  • Tires: 1.4" (35mm) wide, 3.4" (86mm) diameter with foam inserts
  • Wheels: Seven spoke 1.2" (31.5mm) wide, 2.2" (57mm) diameter
  • Warranty: Thunder Tiger guarantees this truck to be free from defects in both material and workmanship. This warranty does not cover any components damaged by use or modification. A part or parts missing from the kit must be reported within 60 days of purchase. No part or parts will be sent under warranty without proof of purchase

Review Summary