Top Flite Cessna 182 Skylane Gold Edition .60 Size ARF TOPA0906

Add $99.00 to receive Free for eligibility
reg $599.99

In Stock.

This item qualifies for BUNDLE & SAVE
This is the Top Flite Cessna 182 Skylane Gold Edition .60 Size ARF Airplane.

  • IMAA Legal
  • Made of balsa and plywood
  • One-piece wing with a plywood wing joiner
  • Dual servo aileron control
  • Top Flite MonoKote covering
  • Painted fiberglass cowl
  • Cockpit with seats and instrument panel
  • Two landing lights in cowl, one navigational light on each wing and red MARS beacon light on top of fin (requires separate receiver battery)
  • Polished aluminum spinner, 2.25" (57mm) diameter
  • Main, two piece fiberglass landing gear
  • Nosegear 0.20" (5mm) diameter prebent wire
  • Fiberglass wheel pants, white colored
  • Three foam wheels, two main 3.25" (82mm) diameter, one nosewheel 2.75" (70mm) diameter
  • Two-piece composite engine mount
  • Fuel tank is approx. 14oz (420cc)
  • Building Time: Ready to fly in 15-20 hours
  • Warranty (through the manufacturer): Top Flite Models guarantees this kit to be free from defects in both material and workmanship at the date of purchase.
  • This warranty does not cover any component parts damaged by use or modification. In no case shall Top Flite's liability exceed the original cost of the purchased kit.

The Top Flite Cessna Skylane 182 is instantly recognizable and easy to enjoy with this Gold Edition ARF (almost-ready-to-fly). The attention to authentic touches is beyond obvious at every turn, from the twin radio antenna on the wing to the built-in lighting system.

One Top Flite Cessna 182 Skylane Gold Edition .60 Size ARF Airplane with decals, all hardware, clear plastic windshield and side glass, fiberglass tail cone, engine mount, cowl, three wheels, instruction manual and wheel pants

Engine: .60-.91 cu in (10-15cc) two-stroke OR
.91-1.20 cu in (15-20cc) four-stroke OR
Motor: Rimfire 120 (50-65-450) Outrunner
LiPo Batteries: Two connected in series if using electric motor
Radio: 6-channel
Servos: Six standard with at least 44oz/in (3.2kg/cm) torque
24" (610mm) Servo Extensions: Two for ailerons
12" (305mm) Servo Extensions: Six for ailerons, flaps and wing tip lights
Y Harnesses: Two for aileron and flap surfaces
Receiver Packs: 1000mAh minimum and 600mAh pack for flying lights
Wingspan: 81 in (2060mm)
Wing Area: 898 sq in (57.9 dm2)
Weight: 11.5 - 12.5lb (5220 - 5670g)
Wing Loading: 30 - 32 oz/sq ft (92 - 98 g/sq dm)
Length: 64 in (1630mm)
Airfoil: Semi-symmetrical
CG (Center of Gravity): 4-5/16" (110mm) back from the leading edge of the wing

Control Throws
Low Rate
3/4" (19mm) 10 degrees
Rudder: 5/8" (16mm) 9 degrees
Ailerons: 1/2" (13mm) 14 degrees

High Rate
1-1/16" (27mm) 15 degrees
Rudder: 1" (25mm) 15 degrees
Ailerons: 5/8" (16mm) 17 degrees

Half (down):
1/2 - 1" (25mm) 18 degreesdown
Full (down): 2" (51mm) 36 degrees down

Review Summary


3 Stars top flite cessna 182

robert from berkshire wrote (April 30, 2014):

in the kit no servo mounting blocks cabin kit all cracked and broken so i have to order new cabin set please check and pack well thank you