Top Flite P-47 Thunderbolt Giant Scale Airplane RTF TOPA0710
TOPA0710 Top Flite P-47 Thunderbolt Giant Scale Airplane RTF

Top Flite P-47 Thunderbolt Giant Scale Airplane RTF TOPA0710

reg $849.99
$599.99

In Stock. Usually ships within 24 hours.

This is the Top Flite P-47D Thunderbolt Giant Scale Sport Airplane RTF.

Includes:
Pre-built fuselage and tail assemblies
Wheels
Decals
Landing gear
Hardware
Spinner hub
Pre-built and covered wings
Cockpit kit
Hardware package
Fuel tank
Replica radial engine

Requires:
Radio: 5 - 7 channel
Servos: 50 oz-in torque; 2 each for elevators; ailerons and flaps; 1 each rudder and throttle; Micro, 1 if retracts are installed; 1 standard servo for optional choke
Four 6" (152mm) Servo Extensions: Throttle, optional choke, ailerons and flaps
One 24" (609mm) Servo Extension: Ailerons
Four 6" (152mm) Y-Harness: Elevator, rudder/steering, ailerons and flaps
Engine: 2.6 - 4.0 cu in (43 - 65cc) gasoline powered
Building and Field Equipment: Tools, propeller, fuel filter, foam rubber padding

Notes:
For intermediate to advanced modeler/flyers with moderate low-wing experience.
Wingspan: 85" (2160mm)
Wing Area: 1329sq" (85.7 dm)
Weight: 19.5-21.5 lb (8.84-9.75 kg)
Wing Loading: 34-37 oz/in (104-113 g/dm)
Length: 75" (1905mm)
Center of Gravity: 6-3/8" (162mm) back from the leading edge of the wing at the fuselage
Control Throws- Low Rate
Elevator: Up & Down 1/2" (12.7mm)8 degrees
Rudder: Right to Left 1-3/8" (35mm)16 degrees
Ailerons: Up & Down 1/2" (12.7mm)10 degrees
Control Throws- High Rate
Elevator: Up & Down 3/4" (19.1mm) 12 degrees
Rudder: Right to Left 1-7/8 (47mm) 22 degrees
Ailerons: Up & Down 3/4" (19.1mm) 15 degrees
Flaps: 2-3/8" (60mm) 34 degrees down
Features:
  • Cowl is unpainted fiberglass
  • Made of Plywood and built-up balsa sheeting
  • Ready to fly in several hours
  • The wings are one-piece with wing joiner
  • Radial Engine Replica is made of Molded plastic
  • Heavy duty fixed pre-bent wire Landing Gear
  • Wheels include Foam, two main and one tail-wheel
  • Dual servo, flap control and Aileron Control
  • The Cockpit is Plastic molded in white with instrument panel, left and right control panels, seat, floor and control stick
  • Engine Mount is made of Plywood firewall
  • Stabilizer has Aluminum tubes automatically align stab halves and reduce workshop time
  • Two-piece aluminum spinner hub
  • Top Flite Models guarantees this kit free from defects
  • in material and workmanship at the date of purchase.
  • Warranty does not cover any component parts damaged by use or modification.
  • Full set, IMAA legal

Review Summary