Top Flite P-47 .61 Thunderbolt 1/7 Scale Airplane ARF TOPA0955
TOPA0955 Top Flite P-47 .61 Thunderbolt 1/7 Scale Airplane ARF

Top Flite P-47 .61 Thunderbolt 1/7 Scale Airplane ARF TOPA0955

reg $479.99
$369.99

In Stock. Usually ships within 24 hours.

This is the Top Flite P-47 .61 size Thunderbolt 1/7 Scale Airplane ARF.

Includes:
Pre-built and covered wings
Fuselage and tail assemblies
Push-rods
Retractable main landing gear
1.25" (31.75mm) tail-wheel
3.25" (83mm) main wheels
Adjustable engine mount
Painted canopy
Seat back
14oz (420cc) fuel tank
Pilot bust
Instrument panel
Dummy radio
Battery
Belly pan
Fiberglass air scoop
Fiberglass cowl
ABS exhaust stacks
Machine guns
Landing gear strut cover
Full set of color decals
Extensive hardware package

Requires:
Engine: .60 - .91 cu in (10 - 15cc) 2-stroke OR .90 - 1.20 cu in (15 - 20cc) 4-stroke
Radio: 6-channel
Servos: 7 Standard (2-Aileron, 1-Elevator, 1-Throttle, 1-Rudder, 2-flap servos)
1-Retract Servo (for mechanical retracts)
Two 24" Servo Extensions(one for each aileron servo)
6" (152mm) Servo Extensions (aileron, flap, landing gear)
Two Dual Servo Extension for flap and aileron servos
Receiver Battery: 1000mAh minimum
Misc. Items: Glow plug, -+" foam rubber padding, medium fuel tubing, fuel filter, propeller, building and field equipment.
Wingspan: 63" (1600mm)
Wing Area: 730 sq" (46.5 sq dm)
Weight: 9.5-10.5 lb (3970-4540 g)
Wing Loading: 30-33 oz/in (90-101 g/dm)
Length: 56" (1420mm)
Center of Gravity: 4-1/8" (105mm) Back from the wing's leading edge at the fuselage
Control Throws- Low Rate
Elevator: Up & Down 13/8" (10mm) 10 degrees
Rudder: Right to Left 1" (25mm) 15 degrees
Ailerons: Up & Down 3/8" (10mm) 11 degrees
Control Throws- High Rate
Elevator: Up & Down 1/2" (13mm) 11 degrees
Rudder: Right to Left 1-3/8" (35mm) 21 degrees
Ailerons: Up & Down 9/16" (14mm) 16 degrees
Flaps: 2" (51mm) 36-¦ One Half 7/8" (22mm) 16 degrees
Features:
  • Built up balsa and light plywood fuselage and wings
  • One-piece wing, with built-in flaps
  • Easily accessible radio compartment, plywood reinforced
  • Pre-painted fiberglass cowl
  • Factory applied Top Flite MonoKote
  • Vacu-formed clear, pre-painted canopy
  • Two 3.25" (83mm) main wheels
  • Mechanical retracting landing gear
  • One 1.25"(31.75mm) tail-wheel
  • Two dual wing servos per half (1 flap, 1 aileron)
  • Cockpit has an instrument Panel and a seat back
  • Pre-painted fiberglass air scoop
  • Top Flite Models guarantees this kit free of defects in material and workmanship at the date of purchase. This warranty does not cover any component parts damaged by use or modification.
  • Ready to fly in only 15-20 hours

Review Summary