Top Flite AT-6 Texan .60 Size ARF w/Retracts TOPA0965

Add $99.00 to receive Free for eligibility
reg $449.99

Out of Stock.

This item qualifies for BUNDLE & SAVE
This item qualifies for FREE SHIPPING
This is the Top Flite AT-6 Texan Glow Powered ARF Airplane with Retracts.

One Top Flite AT-6 Texan Glow Powered ARF Airplane with Retracts, Wheels, Engine Mount, two Pilot Busts, two Instrument Panels, Canopy, two Decal Sheets and an Instruction Manual

Radio: 6 channel
Servos: 7 servos with at least 50 oz-in torque and one retract servo with at least 60 oz-in torque
6" (150mm) Servo Extension: One
12" (300mm) Servo Extension: Seven
Y-Harness: Two, for flap and aileron servos
Receiver Battery: 1000mAh minimum
Engine: .60 cu in (10cc) two-stroke OR .91 cu in (15cc) four stroke
  • Wing: One piece with center section and hardwood wing joiners and wing joiner covers
  • Radio Compartment: Plywood reinforced, accessible under canopy
  • Aileron Control: Dual servo
  • Landing Gear: Mechanical retracts
  • Interior Features: Two fully painted pilot busts, two instrument panels with gauge detail and two seatbacks
  • Fuel Tank: 16oz (480cc), approximate
  • Spinner: Aluminum 2.5" (63mm) diameter
  • Construction: Balsa and plywood
  • Covering: Top Flite MonoKote
  • Cowl: Painted fiberglass
  • Canopy and Windows: Clear with painted-on window frames
  • Wheels: Foam construction, two 3" (76mm) diameter main wheels and one 1.25" (32mm) tailwheel
  • Engine Mount: Two-piece composite
  • Building Time: Ready to fly in approximately 18-25 hours
  • Warranty (through the manufacturer): Top Flite Models guarantees this kit to be free of defects in material and workmanship at the date of purchase. This warranty does not cover any component parts damaged by use or modification.
Wingspan: 69" (1755mm)
Wing Area:
730 sq in (47.1 dm2)
8.5-9.5 lb (3855-4310g)
Wing Loading:
27-30 oz/sq ft (82-91 g/dm2)
51" (1295mm)
Semi symmmetrical, low wing placement
Center of Gravity:
4-1/4" (108mm) back from the leading edge of the bottom wing measured where the center section of the wing and the and the outer wing panel join

Control Throws
Low Rate
1/2" (13mm) 8 degrees
1-1/4" (32mm) 15 degrees
3/4" (19mm) 19 degrees
1" (25mm) 26 degrees

High Rate

5/8" (16mm) 11 degrees
1-3/4" (44mm) 22 degrees
1" (25mm) 26 degrees
1-3/8" (35mm) 38 degrees

Review Summary