Traxxas VXL-3S ESC Waterproof Brushless TRA3355R
Traxxas VXL-3S ESC Waterproof Brushless TRA3355R

Traxxas VXL-3S ESC Waterproof Brushless TRA3355R

Add $99.00 to receive Free for eligibility
reg $220.00

In Stock. Usually ships within 24 hours.

This item qualifies for FREE SHIPPING
This is the Traxxas VXL-3S Waterproof Brushless ESC.


One Traxxas VXL-3s Electronic Speed Control with 12 Gauge Motor and Battery Cables, three preinstalled 3.5mm Female Bullet Motor Connectors, Traxxas High-Current Male Battery Connector, a Universal Receiver Connector and an Instruction Manual

Installing in vehicle and connecting to battery, receiver and motor
  • Compatible with 4-cell NiCd or NiMH batteries up to 3S LiPo packs (11.1V)
  • Three drive profiles Sport, Race and Training mode
  • Battery over-voltage protection triggers failsafe if maximum input voltage is exceeded
  • Sensored motor backup protection switches to sensorless operation if motor sensor fails
  • Auto detects brushed, brushless or sensored brushless motor types
  • EZ-Set(R) one-touch push-button set-up
  • Locked rotor protection if vehicle is stuck or motor is bound
  • Sensor phase detection protects against improperly wiring aftermarket sensored motors
  • Auxiliary fan output (fan not included)
  • For the Traxxas Slash 2WD, Rustler VXL Captain's Curse, Maximum Destruction, Slash VXL 2WD, Stampede 4x4 VXL, Slash VXL RTR, Grave Digger, Son-uva Digger, Rally 4WD, Telluride 4x4, and Stampede 4x4
Input Voltage: 4.8 - 11.1V (4-9 NiMH, 2S-3S LiPo)
Motor Compatibility: Brushed/Brushless/Sensorless Brushless
Motor Limit: None
Continuous Current: 200A
Peak Current: 320A
BEC Current: 6.0V DC
Transistor Type: MOSFET
On-Resistance: 0.00075 ohms
PWM Frequency: 12,000Hz
Thermal Protection: Two-Stage Thermal Shutdown
Weight: 3.84 oz (109g)
Length: 2.19" (57mm)
Width: 1.54" (39mm)
Height: 1.3" (33mm) including heatsink
  • Traxxas Rally 1/10

Review Summary