Wing Tote is constructed of 600 denier nylon, durable and water resistant. Pocket with Velcro flap for wing pole or joiner is located on front of bag. Inside is lined with heavy fleece to protect plane covering 3/8" (10mm) thick closed cell foam between outer nylon and inner fleece. Center also has layer of 3/8" (10mm) thick closed cell foam enclosed in fleece and secured by Velcro that separates the two wings. Woven shoulder straps are spaced to balance on modeler's shoulder with 1-1/2" (38mm) webbing for comfort. Can be hung vertically or horizontally. Two zippers go around three sides to allow wing to be inserted easily zippers don't go completely around the sides reducing the chance of wing falling out in case bag is accidentally left open.