Jaco 1/10 Nitro Shoes Foam Tire 35 Shore JAC3035P
Jaco pair of 1/10 Scale Nitro Shoes 35 Sedan Front Foam Tires and Wheels.
Warning: Last items in stock!
More information about Jaco 1/10 Nitro Shoes Foam Tire 35 Shore JAC3035P
Jaco pair of tires and wheels are for 1/10 scale nitro touring cars. Specially made for the high speed demands of nitro touring cars. Mounted on rigid 26mm wide white 6-hole rims. Glued with CA to bond the rubber to the rim. Used by some of the top racers around the world.
The hardness of materials is most commonly measured by the Shore Durometer test. This method measures the resistance of foam toward indentation and provides a hardness value. A Shore Durometer is the international standard for measuring the hardness of materials. The symbol for shore coincides with that of degrees. In reference to foam tires, the lower the shore rating, the softer the tire is thus yielding more traction. The higher the shore rating, the firmer the tire is thus yielding less rolling resistance and more speed.
Specifications for Jaco 1/10 Nitro Shoes Foam Tire 35 Shore JAC3035P
|Tires & Wheels|
Width: 1.07" (27.15mm)
Reviews for Jaco 1/10 Nitro Shoes Foam Tire 35 Shore JAC3035P
"Jaco speed tires"
"The jaco tires are great for high speed cars"
Recommended to buy: Yes
Questions and answers about Jaco 1/10 Nitro Shoes Foam Tire 35 Shore JAC3035P
Do these tires fit a rustler vxl 12 hex size front and rear..
These do have the 12mm hex but these are for touring car chassis so they are really small. We would recommend these part numbers for the Rustler JAC2030 and JAC2050.
Will these fit my Traxxas nitro 4 Tec. And also are these tires front or rear?
Yes they will fit a Traxxas Nitro 4 Tec and you could use them all the way around. These are a 26mm so if you did want to run a wider rear than the front then I would recommend these BXRF3035 and BXRF2635.