More information about Axial 72-103Mm Shock Set 10Mm Piston AXIAX30092
This is the Axial 72-103Mm Shock Set.
- Threaded shock body for easy pre-load adjustment
- Aluminum shock body for less shock body flex
- Aluminum cap and adjustable preload spacer
- Machined delrin piston for silky smooth performance and less lateral movement
- 3.5mm titanium nitride coated (TiNi) shock shaft that reduces lateral movement
- Cartridge style bottom helps reduce lateral movement while providing a better seal for less leakage.
- Silicone diaphragm that provides a more consistent feel and a better seal to prevent leakage.
- Silicone bushing in the cap holds shock in place while allowing freedom of movement to prevent binding and prevents the shock cap from popping off.
- Full range of shocks springs available to fine tune the ride (AX30218 Spring 14x70mm 2.07 lbs/in - Super Soft (red) included as standard).
- Machined flats on shock shafts allow you to hang on to the shaft with pliers for maintenance without scarring the TiNi coating.
- Dual stage shock pistons included.
- Three different length rod ends included for adjustable ride height.
- Rubber bump stops for high speed applications, soften landings from those harsh jumps.
Two Unassembled Aluminum Shocks with instruction sheet
Installation on the vehicle
Silicone shock oil of modeler's choice