Currently Out of Stock
Warning: Last items in stock!
This is the Castle Creations short course race pro system with the Mamba Max Pro SCT ESC and 3800kV Brushless Motor.
Includes: Mamba Max Pro SCT ESC and 3800kV Brushless Motor with Connectors
Requires: Installing in vehicle and connecting to battery and receiver
Note: This system can only be used with a 2S LiPo battery when using the stock gearing of the vehicle. A 3S LiPo can be used, but the gearing of the vehicle must be changed to handle the increased power output.
|Main Category||Motors & Accessories|
|Part Type||Hop-up Parts|
|Free Shipping||Free Shipping|
Mamba Max Pro ESC
Cell Handling Capability: up to 6S LiPo
Brake: Proportional with adjustable curve
Reversible: Yes, with lockout
Low Voltage Cutoff: Programmable
Size: 1.79x1.44x0.85" (45.5x36.5x21.5mm)
Weight: 2.8oz (81g) with wires
Connectors: 4mm bullet
Shaft Diameter: 0.20" (5mm)
Can Diameter: 36mm
Can Length: 53mm
Connectors: 4mm bullet
No customer reviews for the moment.
how much rpm's will this put out whit and without a lipo batterie.
The KV rating is basically your RPM so this motor is approximately 3800 RPM although most of Castle motors are designed for 80,000+ RPM's. As for testing each battery type and dyno testing them, there is unfortunately no way to do this. Performance out of a LiPo pack overall will provide better performance.
If I put this motor and esc in a Traxxas Slash 4x4 Ulitmate with Traction Stability Management, would this effect the Traction Stability Management?
The TSM works with the receiver and the transmitter so changing the ESC and motor should not effect the TSM at all.
would this be a good motor to put in a axial rr10 bomber i want it to be really fast for racing if not what are your recommendations also about how fast wuld my truck be with this motor in it
These rigs are more for rock crawling/ rock racing and really are not know to be blistering fast but you should be able to get plenty of speed to have fun with it.. This motor and ESC will work great in the Bomber kit with a 2s lipo pack.
Is this system sensored and will it work with my traxxas stampede 4x4 vxl
This is a sensorless system and yes it will fit in the Stampede 4x4 but rated to run a 2s pack only.
Will this work for a Stampede XL-5 without modification? Also can the ESC be re-wired to accept Traxxas style connectors?
Yes this system will fit in the Stampede XL-5 but you would have to get a new pinion gear since the motor shaft diameter is 5mm. As for the plug, these systems do not come with any battery plug on them so you can solder the one of your preference.