DuraTrax 23cc Gas Engine w/Pull Start Complete DTXG0270
DuraTrax 23cc Gas Engine w/Pull Start Complete
Warning: Last items in stock!
More information about DuraTrax 23cc Gas Engine w/Pull Start Complete DTXG0270
This is the Duratrax 1.40 cu in (23cc) 2-cycle gasoline engine with pull starter.
- Walbro carburetor with primer bulb and foam air filter
- Aluminum crankcase with Black plastic pull start cover and cylinder head shroud
- Uses unleaded gasoline and 2-cycle oil
- Kill switch for added safety
- NGK CMR7H or CHAMPION RZ7C spark plug, available at hardware stores and small engine shops
Includes: One 1.40 cu in (23cc) gasoline engine with foam air filter, plug wrench and illustrated parts list
Requires: 2-cycle oil
Note: No instruction manual provided. Figures such as horsepower, max RPM, bore and stroke not provided. Clutch housing shown in photo is no longer included.
Specifications for DuraTrax 23cc Gas Engine w/Pull Start Complete DTXG0270
|Engines & Accessories|
|Gas - Petro Engines|
Length: 5.75" (146mm) from pull starter to end of crankshaft
Width: 6.73" (171mm) from air filter to opposite end of crankcase
Height: 7.75 (197mm) including spark plug
Weight: 3.7lbs (1687g)
Gasoline/oil mix: 40:1
Needle Settings: 1.5 turns out from fully closed on both high speed and low speed.
Reviews for DuraTrax 23cc Gas Engine w/Pull Start Complete DTXG0270
No customer reviews for the moment.
Questions and answers about DuraTrax 23cc Gas Engine w/Pull Start Complete DTXG0270
How does this mount for a boat?
You would typically put a drive pulley, engine cable coupler, flex cable and drive dog but we are not seeing anything that is specific that will fit this engine.