Warning: Last items in stock!
This is the DuraTrax/SuperTigre G-27 pull start racing engine for the DuraTrax Warhead.
Includes: DuraTrax/SuperTigre G-27 Pull Start Racing Engine
Note: This engine is intended for use in the DuraTrax Warhead and does not include an instruction manual. Refer to engine installation and maintenance sections in the Warhead manual.
|Engines & Accessories|
|.16 & UP - CAR|
Displacement: 0.27 cu in (4.4 cc)
Bore: 0.72" (18.2mm)
Stroke: 0.67" (17mm)
Output: 2.5 hp @ 30,000 rpm
Practical RPM Range: 3,000-35,000
Weight: 14.1oz (400g)
Distance Between Mounting Holes Same Side: 0.83" (21mm)
Distance Between Mounting Holes Opposite Side: 1.4" (37mm)
Height from Bottom of Mounting Tabs/Top of Cylinder Head: 3.6" (92mm)
Height from Bottom of Crankcase to Top of Cylinder Head: 4.2" (107mm)
Width at Mounting Tabs: 1.8" (46mm)
Distance from Pull Start to Front Bearing: 3.3" (84.5mm)
Distance from Pull Start to End of Crankshaft: 3.9" (99mm)
Diameter of Exhaust Opening: 0.59" (15mm)
Diameter of Carburetor Opening: 0.56" (14.2mm)
Factory Needle Settings
High Speed Needle: 4.5 turns OUT from closed
Low Speed Needle: 12.5 turns OUT from closed (1 turn OUT from flush with ball link body)
No customer reviews for the moment.
Is this vaguely 15 hp? I need vaguely 15 horsepower, I'm building a cricri. I want to use your engines I believe, unless I find some amazing craigslist thing.
Output: 2.5 hp @ 30,000 rpm, unfortunately we don't have any engines with that amount of HP.