Warning: Last items in stock!
This is the DuraTrax LiPo 7.4V 1600mAh 20C hard case mini battery pack with mini plug.
Features: For use in the DuraTrax Vendetta, Mini Quake, Cliff Climber and other 1/16 to 1/18 scale vehicles that use batteries with mini plugs
Includes: DuraTrax LiPo 7.4V 1600mAh 20C Hard Case Battery Pack with Mini Plug
Requires: Balancer such as the Team Checkpoint Balancer, and 2S Adapter XH Plug
Note: All weights include wire leads and plugs. Weights +/- 1g and measurements +/- 1mm. Always use a LiPo-approved charger, LiPo cell balancer and set charger’s output volts to match battery volts. Be sure to keep out of reach of children and charge in a fireproof location. Never charge over 4.2V per cell, charge at currents greater than 1C, allow discharging below 2.5V per cell, charge through the “To ESC” or “Discharge” lead or trickle charge. Do not disassemble or modify pack wiring in any way, puncture cells, place on combustible materials or leave unattended during charging.
|Main Category||Batteries & Accessories|
|Plug Type||Micro Plug|
|Free Shipping||Free Shipping|
|In-Store Pickup QTY||1|
Number of Cells in Series: 2
Rated Voltage: 7.4V
Continuous Discharge Rate: 20C
Maximum Recommended Charge Current: 1C (1.6 amps)
Charge Lead: 24AWG, 1.2" (30mm) long wire with XH Balance Plug
Discharge Lead: 20AWG, 3.5" (90mm) long wire with Mini Plug
Pack Dimensions: 3.3x1.2x0.7" (85x31x17mm)
Weight: 3oz (85g) all plugs and wires are included in weights
"well made, nice punch, and long duration. a very well made battery"
Recommended to buy: Yes