Currently Out of Stock
Warning: Last items in stock!
This is the Great Planes ElectriFly PolyCharge4 four-output LiPo DC battery charger. The ElectriFly PolyCharge4 DC charger functions as if you had four individual LiPo battery chargers. It is capable of charging up to four 1-4S LiPo batteries and it is nearly effortless to use. All you need to do is connect your pack and adjust the dial to the capacity of the battery for each output and the PolyCharge4 takes care of the rest!
1x Great Planes ElectriFly LiPo DC Battery Charger
1x Aligator Clip Input Connector
4x Banana Jack Charge Outputs
1x Instruction Manual
12V-15V DC Power Supply such as the Rivergate 15A DC Bulldog or an automotive battery capable of providing at least 14A continuously.
Charge leads with banana plugs and battery connector to match battery, can use the following charge leads:
GPMM3105 - Banana Plug to BEC Connector Charge Leads
HCAP0101 - Futaba J Tx/Rx Leads All Radios Except 9VAP
HCAP0102 - Futaba J Tx/Rx Leads 9VAP Only
HCAP0105 - JR Tx/Rx Leads
HCAP0106 - Hitec Tx/Rx Leads
HCAP0108 - Banana Plug to Alligator Clip Charge Leads
HCAP0110 - Tx Battery with 9V Connector, Futaba J Rx Charge Lead
Other charge leads would need to be fabricated using HCAP0310 Banana Plugs and a battery connector to match the battery.
The instructions for the ElectriFly PolyCharge4 charger states that the built-in fan will turn on when a load is present on any of the four outputs. This is incorrect. The built-in fan will turn on anytime input power is applied to the charger. We regret this error.
The maximum voltage that LiPo cells can receive during charge is roughly 4.20V. It is not uncommon that after charging LiPo battery packs containing multiple cells for the voltage to be slightly less than 4.20V per cell. This is normal. Cells which repeatedly measure under 4.10V after being charged may require further evaluation. Cells which repeatedly measure under 4.00V after being charged may require replacement.
|Main Category||Chargers & Accessories|
|Free Shipping||Free Shipping|
|In-Store Pickup QTY||0|
Input Voltage: 12-15V DC
Number of Outputs: 4
Input Connectors: Alligator clips, hard-wired directly to charger
Case Size: 8.2" x 1.5" x 5" (208x38x126mm)
Weight: 21.8oz (617g)
Battery Type: 1-4 (3.7-14.8V) Lithium Polymer cells only
Charge Control: Push-button
Charge Termination: "Constant Current/Constant Voltage"
Battery Capacity Range: 300-3000mAh (for batteries larger than 3000mAh, full Charge time will exceed one hour)
Fast Charge Current: 300mA-3.0A
Status Indicators: Tri-colored LED and audible buzzer
Charge Output Jacks: Banana jacks
Safety Timer: 3-hour maximum Charge time
Fuse: 20A replaceable auto type spade fuse
No customer reviews for the moment.