RPM Rear Upper/Lower A-Arms Green Traxxas Mini E-Revo RPM80604
RPM Green Rear Upper and Lower A-Arms for the1/16 scale Traxxas Mini E-Revo.
Warning: Last items in stock!
More information about RPM Rear Upper/Lower A-Arms Green Traxxas Mini E-Revo RPM80604This is a pair of RPM Green Rear Upper and Lower A-Arms for the1/16 scale Traxxas Mini E-Revo.
Similar to RPM front A-arms, these rear arms eliminate nearly all of the A-arm slop typically found in stock Mini E-Revo rear A-arms, allowing camber and toe angle settings to be more solidly fixed in position. The result: A smoother, much more consistent suspension system with a significantly reduced tendency for the truck to randomly wander while driving.
RPM rear suspension arms match the same design elements as their front a-arms, using angled leading and trailing edges. By incorporating a 30-degree bevel in these areas, RPM has reduced the chance of breaking suspension parts since the A-arms will naturally try to transition over objects instead of bluntly plowing into them.
RPM Mini E-Revo rear A-arms are sold in sets of four – both upper and both lower A-arms. What’s best? These miniature E-Revo A-arms, like all RPM molded products, are backed by RPM’s industry-leading breakage warranty. If it breaks (under normal operating conditions), send it in to RPM and they’ll replace it!
Two Rear Upper and two Lower A-Arms with two 2.5x12mm Screws and an Instruction Sheet
Installation onto vehicle
Specifications for RPM Rear Upper/Lower A-Arms Green Traxxas Mini E-Revo RPM80604
Car & Truck Parts
- Green colored
- Made of durable plastic
- Eliminates nearly all of the A-arm slop typically found in stock Mini E-Revo rear A-arms
- Gives you a smoother, much more consistent suspension system
- For the Traxxas E-Revo
Reviews for RPM Rear Upper/Lower A-Arms Green Traxxas Mini E-Revo RPM80604
No customer reviews for the moment.
Questions and answers about RPM Rear Upper/Lower A-Arms Green Traxxas Mini E-Revo RPM80604
what are the parts #s for the new links and drive shafts if I only put these on the back of my traxxas slash 4x4?
TRA7151X x 1, TRA7138 (X or G) x 1, TRA7118 (x or G) x 1.
Will these work on a 1/16 Traxxas slash 4x4 if I got new links? If so what would the part number # be for these new links? Thanks!
These would fit on the Slash 1/16 but you would have to change all of the drive shafts as well as the links, you would need the following numbers. 2x TRA7151X, 2x TRA7138 (X or G),2x TRA7118 (x or G).