Warning: Last items in stock!
This is the Redcat Racing Tornado EPX Pro 1/10 Scale Brushless Buggy. Adjustable suspension provides smooth performance for any terrain, while the adjustable wing creates rear downforce for added traction and high speed stability. With a 3300KV brushless 540 motor, LIPO 3500mAh 15c battery & brushless ESC provide the power and precision needed to blow away the competition.
The Tornado EPX PRO has many blue anodized aluminum parts including upper chassis plate, race adjustable shock towers, tunable oil filled coil over shocks, and motor can. Shaft driven 4WD provides you with the necessary traction to maneuver the toughest obstacles and the forward/reverse ESC is beneficial in navigating tight spots.
Requires: 8 AA batteries for transmitter
Note: now includes Waterproof Electronics (ESC, Servo, Receiver)!
|Main Category||R/C Vehicles|
|Power Type||Electric Power|
|Build Type||Ready to Run|
|Skill Level||Skill Level 1|
|Note||Manufacturer does not allow discount coupons on this item.|
No customer reviews for the moment.
Out of the box it goes about 40 mph.
Can this run 3s LiPo or only 2s?
Yes you can run a 2s or 3s packs in this buggy.
What charger? Does it charge the battery in about an hour?
It does come with a basic LiPo charger and takes about 2-3 hours to charge depending on how full the pack is.
Is there any way to increase the ground clearance? Is it semi-waterproof?
You could pre load the shock springs and then move the shocks to a lower position on the shock tower to get a bit more clearance but not much more beyond that. As for the waterproof, they do claim that the electronics are water resistant so with proper care and maintenance you can operate this in all weather conditions.
What type of connector do I need to buy to use a Venom 5000 20c 7.4 volt battery in a Tornado EPX pro R/C Car?
You would need to get this Redcat Racing 4.0 Banana Plug to T Plug (REDST-4BTOT).