Currently Out of Stock
Warning: Last items in stock!
Top Flite P-51D was designed for new and established scale modelers anyone who doesn't have time to create scale detail from scratch. Its computer-simplified design brings the most popular WWII fighter to life with unparalleled building ease and authenticity.
Photo-illustrated manual speeds hobbyists through assembly, and includes steps for optional retract and flap installation. Molded ABS half-cowl and 1-piece radiator scoops, plus precision-formed exhaust ports and wing guns, add detail without work...lear canopy includes molded-in relief details. Wings are fully sheeted for additional authenticity. Optional Conversion Kit converts this well known P-51D version to the earlier P-51B "razor back"
"Just about all kit manufacturers produce Mustangs, and while they all have at least one virtue...op Flite has managed to combine all these features and more into one neat (and affordable) package." Radio Control Modeler
Includes: All Balsa and Plywood to Complete the kit, Clear Canopy, ABS Cowling and Detailing parts, Wire Landing Gear, Decals, Illustrated Instruction Manual, CAD-produced Rolled Plans, Pushrods, and Hardware.
|Skill Level 5|
Wing Area: 734 sq inches
Wing Loading: 25 to 30oz/sq ft
Center of Gravity: 3-7/8" back from Leading Edge Break (LE break is point where LE goes from steep sweep near fuse to shallow angle)
Engine Thrust: 1.75? down, 1.6° right
"dale costello "
"topa0110 great models "
"Top flite models are always a challenge to build but it comes out beautiful and very authentic. Thanks "
Recommended to buy: Yes
What gas engine will fit it?
This is set up to fit .60 - .90 (2-stroke) or .90 - 1.20 (4-stroke) Engines. We do not see that any gas engines are recommended for this plane kit.
What is the minimum takeoff length and max flight time?
This is a kit that is basically a box of wood that will require a lot of time and patience to complete along with all the other required items to complete it. Flight time is about 15 minutes and because this is a large plane you would want to take it to an RC airfield or have plenty of room for take off and landing.
.60-.90 (2-stroke) or .90-1.20 (4-stroke) Engine
4-6 Channel Radio (5th & 6th channels for retracts and/or flaps)
Engine Mount, Fuel Tank, 4" Spinner, 3¼"-4" Main Wheels, 1¼"
Tailwheel, Wheel Collars, Fuel Tubing, Foam Rubber, Building and Field Equipment
Two Rolls of Covering (plus trim colors)