Traxxas Velineon VXL - 3m Brushless Power System for 1/16 Scale TRA3370
This is the Velineon VXL - 3m Brushless Power System for 1/16 Scale TRA3370 by Traxxas
Warning: Last items in stock!
More information about Traxxas Velineon VXL - 3m Brushless Power System for 1/16 Scale TRA3370
Traxxas Velineon VXL3m Extreme Brushless Power System. This is for the 1/16th scale Traxxas vehicles. Ultra high temp sintered neodymium motor magnets. Balanced rotor. High speed ball bearings. Low voltage detection. Traxxas high current connectors. 16-gauge wire.
- Traxxas High-Current Connector maintains pure, unrestricted power flow from the battery to the brushless power system.
- Built-in two-stage low voltage detection for Lithium Polymer (LiPo) battery use provides a clear signal to the driver that the battery pack is nearing its minimum voltage threshold
- Wide range of battery options, including 6-12 cell NiMH or NiCad packs
- The patent-pending Training Mode™ is an exclusive Traxxas feature that reduces the overall power output of the VXL-3m by 50%, making it easier for new or younger drivers to control their model. When they're ready, simply change profiles to unleash full-throttle action.
- Advanced circuit design allows sensorless brushless motors to operate with the smoothness and precision of the best brushed systems. There's no need for additional sensor wiring and hardware complexity.
- The VXL-3m is programmable with three drive profiles: Sport mode, Race mode, and Training mode
- Water resistent case design uses rubber seals and o-rings to protect against damage caused by water and moisture.
- Micro-fin aluminum heatsink dissipates heat.
- MOSFET design provides high-current output (326 amp peak) with incredibly low resistance (.0005 (Ohm)).
- Gold plated 3.5mm bullet connectors on 16-gauge Maxx® Cable flow full power to the motor without performance-strangling resistance.
The Velineon VXL-3m forward/reverse electronic speed control simplifies brushless technology with easy, built-in profiles and intuitive programming. The VXL-3m uses advanced circuit design that allows sensorless brushless motors to operate with the smoothness and precision of the best brushed systems. It sets up, operates, and programs just like the Traxxas XL-5 family of ESCs so there's no tricky new procedures to learn. Traxxas' exclusive patent-pending Training Mode is also included to limit full throttle to 50% for young or inexperienced drivers. For the most advanced users, the VXL-3m is equipped with two-stage low voltage detection to allow LiPo battery use, including powerful 11.1-volt 3S packs!
Specifications for Traxxas Velineon VXL - 3m Brushless Power System for 1/16 Scale TRA3370
|Motors & Accessories|
Input Voltage: 6 to 12 cells NiMH, 2S to 3S LiPo
Case Size: 26.5mm W x 46.5mm D x 22mm H
Weight: 38 grams
Motors: Sensorless Brushless
Motor Limit: None
On Resistance: 0.0005 Ohms
PWM Frequency: 12,000Hz
Peak Current: 326A
Continuous Current: 52A
BEC Voltage: 6.0V DC
Motor / Battery Wiring: 16-Gauge Maxx? Cable
Transistor Type: MOSFET
Low Voltage Detection: 2-Stage indicators, switchable (on or off)
Thermal Protection: 2-Stage thermal shutdown
Single-button setup: Yes, Traxxas EZ-Set?
Battery Input Connector: Traxxas High-Current Connector
Motor Connector: TRX 3.5mm Bullet Connectors
Type: Sensorless Brushless
kV (RPM/Volt): 4000kV (8T)
Magnet Type: High Temp Sintered Neodymium
Connection Type: TRX 3.5mm Bullet
Wire Size: 16g Maxx Cable
Continuous Current: 25A
Max Current: 50A Burst
Max RPM: 50,000
Weight: 140g (4.94oz)
Reviews for Traxxas Velineon VXL - 3m Brushless Power System for 1/16 Scale TRA3370
"Min slash top speed 35 (got on GPS) with a heavy rollcage on it."
Recommended to buy: Yes
"This is a great purchase"
"My old one broke on my e revo so I bought this new one and it seems to be working better the the old one that came with it. With one battery, this. Thing can pull some sweet wheelies with no trouble."
Recommended to buy: Yes
"long way - quick delivery!!quality is more than equal to the nice pricePERFECT... and at the end of day after assembling all the bought items the little car is going like fire :-D FuuuN !"
Recommended to buy: Yes
Questions and answers about Traxxas Velineon VXL - 3m Brushless Power System for 1/16 Scale TRA3370
Will this motor fit a 1/10 stampede 4x4
This system will not fit in the Stampede, this motor and ESC combo are for the 1/16th scale chassis. You will need part # TRA3350R for the correct system for the 1/10th scale Stampede 4x4.
Is this the same motor on the Vxl 1/16 erevo? If so where can I find the esc for it I have the motor I jus need the esc
Yes this is the same motor that is included with the VXL 1/16th Revo. The ESC for this motor is part number TRA3375.
I have an E-revo 1/16 brushed, will this fit or will a TRA3350R make a better fit.
With the brushed Revo that comes equipped with the 12T Titan motor, the TRA3370 will require a motor mount and other parts to be able to make the change since the motor is physically smaller.
With the TRA3350R, this is a larger system but the motor will drop right in the brushed Revo. The ESC with the 3350R will need to mount differently. The chassis has grooves for the 3370's ESC to slide in so these will need to be cut off so the larger ESC can be mounted. Or we have seen some people modify the battery door on that side and put the ESC standing on end in the battery spot. I personally like the larger 3350R system in it.
What plug is installed?
These come with the Traxxas high current connector.
How fast will this motor make a 1/16 Slash go?
With a 3s LiPo pack you should be able to get about 50 MPH out of it. If you have the 12T motor in the truck, you will have to change the motor plate and everything for this smaller motor to fit. You can get the (TRA3350R) 1/10th version and put that in there.