This is the RC10B6.2 1/10 eectric off-road buggy team kit by Team Associated. The B6 platform introduced the use of two separate chassis configurations - the B6.2 continues this theme. The B6.2 will be the buggy of choice for high-grip carpet or turf track surfaces with its Laydown transmission assembly and anti-roll bars for optimal mass balance. The B6.2D includes both Layback and Laydown transmission assemblies to fine-tune mass balance to track conditions; add to that the addition of +1 Ackermann plates and gull wing suspension arms to tune the steering for razor-sharp feel and control.
Both cars share many great features, such as an easy-access differential, outer rear hinge pins captured with bolt head and locknut for increased durability, new symmetric rear arms that can be flipped to allow an in-between rear shock mounting position, and a new slipper assembly. The setups and tuning parts remain interchangeable between the two configurations. Both versions come with the speed, durability and lineage expected of a true champion. Choose the configuration that suits your track and conquer the competition!
Features
- Lightweight 7075-T6 hard anodized and +3mm increased length
- Symmetric 75mm rear arms with improved geometry and stiffness can be flipped to allow an in-between rear shock mounting position
- Longer rear arm (75mm) improves stability and jump landing
- Outer rear hinge pins captured with bolt head and lock nut for increased durability
- Updated left side rail with motor fan mount (fan not included)
- Rear hub assembly with modular vertical ball stud camber link mount and axle height adjustment
- Front wing mount and front wing included
- 69mm CVA bones for reduced bone plunge and minimized friction at drive pin
- 24g and 36g steel chassis weights included for improved balance and lower overall center of mass
- 5mm aluminum clamping wheel hexes
- Differential height adjustment with 0, 1, 2, and 3mm inserts included
Specs
- Power Source: Electric
- Terrain: Off-Road
- Body Style: Buggy
- Scale Size: 1/10 Scale
- Assembly Level: Kit*
- Length: 15.35 in. (390mm)
- Width: varies
- Wheelbase: varies
- Weight: 1.81 lbs (821g)
- Internal Gear Ratio: 2.6:1
- Drive: 2WD
* This vehicle comes as a kit and must be fully assembled by the user. Electronics and/or an engine/motor may be required.
Requires
- 1/10 scale electric motor and electronic speed control
- 7.4V, 7.6V LiPo, 6.6V LiFe with "shorty" battery dimensions (Reedy batteries #27335, 27336, 27337, 27338)
- Battery charger (#27200)
- 2-channel surface transmitter
- 2-channel receiver
- Steering servo (#27113, 27114)
- Lexan(TM)-specific spray paint for body
- 1/10 scale off-road wheels and tires
- Pinion gear
- Other helpful items: Silicone shock fluid, Silicone differential fluid, FT body scissors (#1737), FT body reamer (#1499), FT hex/nut driver set (#1519), CA tire adhesive (#1597), Hobby knife, Needle nose pliers, Wire cutters, Soldering iron, Calipers or a precision ruler