Axial 1/18 Yeti Jr. Can-Am Maverick 4WD Brushed RTR AXI90069

Axial 1/18 Yeti Jr. Can-Am Maverick 4WD Brushed RTR AXI90069
Price: $174.99
Discontinued Online
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
Note: Manufacturer does not allow coupons

This is the Axial electric powered, radio controlled, 1/18 scale, ready to run Yeti Jr Can-Am Maverick 4WD Brushed RTR Truck from Axial.  The Yeti Jr RTR takes everything you admire about the 1/10 scale Yeti chassis and shrinks it down to 1/18 scale - then tops it off with a licensed Can-Am Maverick X3 body for a fun 4WD that anyone can handle. Out of the box, this tiny terror is ready for scale adventures!

Before the Yeti, the only place to find an independent suspension with floating solid rear axle was in full-size off-road vehicles. Axial carried its advantages over into RC rock racers and crawlers. The suspension design give the Yeti Jr responsive handling, increased clearance, and improved stability at high speeds. Its included 380-size motor adds the perfect amount of speed and torque. When that muscle meets the tread of the Maxxis Bighorn 2.0 radial tires, you've got all the traction you need for fast, smooth rides over virtually any surface.

1x Yeti Jr Can-Am Maverick X3 RTR Car
1x Spektrum 2.4 GHz STX2 Transmitter
1x 7.2V 6 Cell 1300 mAh NiMH Battery Pack
1x USB NiMH Charger
4x AA Alkaline Batteries
1x Product Manual
Spare Parts and Tools


  • Licensed Can-Am Maverick body and wheels
  • Licensed Maxxis Bighorn 2.0 tires
  • Spektrum STX2 2.4GHz transmitter
  • Spektrum waterproof ESC/Receiver Combo
  • Dynamite 37T brushed electric motor
  • High-torque metal gear servo for rough offroad conditions
  • AR18 solid rear axle with ample ground clearance
  • Adjustable coilover shocks
  • Three-linked rear suspension for improved handling
  • Independent front suspension for high speed stability
  • Rear hinge body mount system
  • 48P gears give you more possible configurations
  • Adujstable motor mount and easy access chassis
  • Full vehicle ball bearings
  • Adjustable battery tray
  • Centered rear driveshaft for efficiency
  • Easy to Use USB Charger Included


Approximate Assembly Time: No assembly required
Ball Bearings: Full set, sealed cartridge type
Batteries: Dynamite 7.2V 1300mAh NiMH with mini EC3 connector, flat configuration, 2/3A cell size
Body: Can-Am Maverick X3 UTV, trimmed and painted, rear hinge body mount system
Bushing Material: Metal
Charger: USB NiMH with red and green status indicators
Chassis: Molded tub style with rear trailing arms
Completion Level: Ready-To-Run
Differential: Bevel gear 35T/15T
Drivetrain: 4WD shaft drive
Front Track: 6.9" (175mm), distance from outer edges of tires measured side-to-side
Gear Pitch: 48-Pitch
Ground Clearance: 1.1" (27mm)
Height: 6.5" (165.1mm)
Length: 11" (279.4mm)
Motor Size: 380 Brush Equipped, 37 Turn
Motor Type: Brushed 380 size
Pinion: 15T
Radio: Spektrum FHSS 2.4GHz STX2 2-channel
Rear Track: 6.9" (175mm) distance from outer edges of tires measured side-to-side
Servos: Spektrum SX107 high torque micro w/metal gears
Shock Type: Coil over, oil-filled, 3mm shafts
Size/Scale: 1/18
Speed Control: ESC/Receiver combo, Water Resistant
Spur Gear: 60T
Suspension: Front-Independent, Rear-3-Link w/integrated sway bar like support, AR18 2-pc solid rear axle w/captured pinion gear
Tire Diameter: 2.8" (72mm)
Tire Tread: Non-directional tread pattern for use on a variety of terrain, S30 firmness compound
Vehicle Type: Off-road
Water-Resistant: Yes
Weight: 1.6lbs (0.7kg)
Wheel Diameter: 1.2" (30.5mm)
Wheel Hex Size: 12mm Hex
Wheel Type: Plastic, black in color, 12mm hexes
Wheelbase: 8.1" (205mm)
Width: 7" (177.8mm)

This product was added to our catalog on February 27, 2019