Axial Capra 1.9 Unlimited Trail Buggy Kit 1/10 4WD AXI03004

The Axial Capra 1.9 Unlimited Trail Buggy Builder's Kit is a "new from the ground up" design that any advanced RC enthusiast eager for cutting-edge crawling will appreciate. Its Currie F9 Portal Axles provide extra ground clearance at the diff pumpkin for the best crawling performance. With the included Dig transmission, you can also switch on the fly between 4WD and FWD directly from your 3-channel transmitter — locking the rear axle whenever you need the tighter turning radius of front drive power. The Capra features a realistic tube chassis design and metal gears everywhere, from the center transmission to the lockers and portal axles. It rides on licensed Raceline 3-piece molded beadlock wheels that can be fitted with whatever 1.9 tires you prefer. For pioneering performance in an RC trail buggy kit, choose the Axial Capra.

Includes:

• Axial Capra 1.9 Unlimited Trail Buggy 4WD Kit
• Product Manual

Requires:

• Radio System
• Steering Servo
• ESC
• Motor
• Battery
• Charger
• Micro Servo (for Dig operation, SPMSSX107 recommended)
• 1.9" Mounted Tires
• Paint

Features:

• Newly designed transmission with Dig function enables a tighter turning radius by locking the rear axle for FWD power only.
• Currie F9 Portal Axles increase ground clearance at the diff pumpkin for the best crawling performance.
• Includes all-metal gears, from the center transmission to the lockers and portal axles.
• Tube chassis design offers optimum clearance plus realistic scale looks.
• All pivot points are on stainless steel balls for a durable, long-lasting suspension point.
• Includes injection-molded, 3-piece, licensed Raceline beadlock wheels.
• Adjustable oil-filled shocks feature hard anodized, threaded shock bodies, a single coilover spring, and a cap with a bleed port.
• All-metal front universal axles provide smooth action and 45 degrees of steering angle for an efficient, high-performance drivetrain.
• Durable, machined aluminum universal.
• Finely tuned suspension geometry delivers the best crawling capabilities

Specs:

Approximate Assembly Time: 7-10 Hours
Ball Bearings: Full set
Batteries: Shorty configuration
Body: Unpainted panels
Brakes: Integral with ESC
Bushing Material: Metal
Charger: Sold separately
Chassis: Injection molded tubular
Completion Level: Kit
Differential: Locked
Drivetrain: 4WD Shaft Drive
Final Drive Ratio: 37:1
Gear Pitch: 32-Pitch
Ground Clearance: 3" (76.2mm)
Height: 8.25" (209.5mm)
Internal Gear Ratio: 5.14:1
Length: 17" (431.8mm)
Max Battery Dimensions: 1.02 x 3.8 x 1.8" (26 x 98 x 47mm)
Motor Size: 540 sold separately
Pinion: 14T
Radio: At least 3-channel (sold separately)
Servos: High torque steering servo (sold separately
Shock Type: Aluminum body, oil-filled, coil-over spring, soft and firm springs included
Size/Scale: 1/10
Speed Control: Axial AE-5L (sold separately) to operate light bar
Suspension: 4-link w/stainless steel pivot balls
Tire Compound: Tires sold separately
Track: Front and Rear, 8.75" (222.2mm) distance from outer edges of tires measured side-to-side
Vehicle Type: Crawler, Scale 4x4 crawler kit
Water-Resistant: Yes
Weight: 4lbs (1.8kg)
Wheel Diameter: 1.9" (48.26mm)
Wheel Hex Size: 12mm Hex
Wheel Type: Raceline 3-piece beadlock monster
Wheel Width: 1" (25.4mm)
Wheelbase: 12.5" (317.5mm)
Width: 10.25" (260.35mm)