Axial SCX24 2019 Jeep Wrangler JLU CRC 1/24 4WD RTR (White)

Axial SCX24 2019 Jeep Wrangler JLU CRC 1/24 4WD RTR (White)
In Stock Online
Limited Quantities Available
FREE Shipping Eligible! Learn More

You might also need...

Hot Racing Brass Knuckles
$26.99 - Hot Racing Brass Front Steering Knuckle SCX24 HRASXTF21H (addon details...)
Wheel Nut Driver
$16.25 - ProTek RC "TruTorque SL" Metric Nut Driver (4.0mm) (addon details...)
.050 Hex Wrench
$16.25 - ProTek RC "TruTorque SL" Standard Hex Driver (.050") (addon details...)
Price: $134.99
Read Reviews
Write a Review
Note: Manufacturer does not allow coupons
This item earns up to 135 VIP Reward Points Learn More

No matter where you are, the 1/24 scale Axial SCX24 Jeep Wrangler JLU CRC 4WD makes it the scene for RC adventures. If you’re stuck at work, go crawling on your desk. A messy room becomes an ideal obstacle course. Take your vehicle outside — where its water-resistant electronics are safe from the elements — and set up an exciting trail with a few holes, twigs, and rocks. Full-time 4WD and a 3-link front/4-link rear suspension let you muscle over big challenges. Worm gears on the axles increase ground clearance, while realistic steel frame rails stand up to hard knocks. The Axial SCX24 Jeep Wrangler JLU CRC performs like a winner and looks like one, too. The realistic body rides on licensed KMC Machete wheels and Nitto Trail Grappler tires. For quick battery access, just remove one clip to tilt back the body. Two LEDs in the front bumper light up the trail for night-time crawling. The SCX24 Jeep Wrangler JLU CRC comes ready-to-run with radio and electronics included and installed.


  • AX-4 2.4GHz 2-Channel Radio
  • AE-6 Forward/Reverse ESC/Rx
  • SCX24 88T Motor with Pinion
  • AS-1 Micro Servo
  • Dynamite® 7.4v 350mAh 2S LiPo Battery
  • USB Charger
  • (4) AA Batteries


  • Includes radio transmitter and receiver and battery
  • Comes with ESC, motor, and servo already installed
  • Features a realistic new body design
  • Licensed wheels are modeled after 1:1 KMC Machete Wheels
  • Licensed tires are modeled after 1:1 Nitto Trail Grappler M/T tires
  • 3-Link front and 4-link rear suspension provides optimal handling


Approximate Assembly Time: No assembly required
Ball Bearings: Full set
Batteries: Dynamite 7.4V 350mAh 30C LiPo
Body: Axial Jeep JL Hardtop
Brakes: Integral with ESC
Charger: USB LiPo Charger
Chassis: Stamped Steel Chassis Rails
Completion Level: Ready-To-Run
Differential: Worm Gear 16T/4T
Drivetrain: 4WD
Ground Clearance: 1.06" (27mm)
Height: 4.2" (106.5mm)
Length: 7.8" (199.5mm)
Motor Size: 180
Motor Type: Brushed, Brushed 180 size, 88 turn
Pinion: 10T
Radio: Axial AX-4 2.4GHz 2-Channel
Servos: AS-1 Micro Steering Servo
Shock Type: Coil-Over, Plastic Body, .9 - 1.3" (24 - 33.4mm)
Size/Scale: 1/24
Speed Control: AE-6 ESC/RX with Reverse
Spur Gear: 55T
Suspension: 3 Link Front and 4 Link Rear
Tire Diameter: 2.0" (51mm)
Tire Tread: Nitto Trail Grappler M/T
Track: Front and Rear, 3.9" (99.5mm) distance from outer edges of tires measured side-to-side
Vehicle Type: Crawler, Desert Crawler
Water-Resistant: Yes
Wheel Diameter: 1.0" (26mm)
Wheel Type: Plastic KMC Machete, black in color
Wheel Width: .48" (12.4mm)
Wheelbase: 5.2" (132.5mm)
Width: 3.9" (99.5mm)

This product was added to our catalog on November 25, 2019