Hobbico VoltWatch2 4.8V/6V Rx Battery Monitor HCAP0332

Hobbico

Item # HCAP0332
$19.99 $11.99
(You save $8.00)
Status: In Stock
UPC:
708066503328
Hobbico VoltWatch2 4.8V/6V Rx Battery Monitor HCAP0332

More information about Hobbico VoltWatch2 4.8V/6V Rx Battery Monitor HCAP0332

This is the VoltWatch2 on-board receiver battery monitor for 4.8V and 6V NiCd and NiMH receiver packs. This mounts on the outside of the airplane, so you can see at a glance the status of the receiver battery mounted inside.

Features:

  • 7-LEDs provide instant, accurate battery voltage status of Low, Safe, or Max.
  • Only one LED glows at a time
  • Small switch to select 4.8V or 6V battery
  • Very lightweight, only .15oz (4.3g) unit can mount on the side of the fuselage, or under the plane's canopy
  • Draws amazingly low current - from 4-34mA depending on the battery voltage
  • Plugs into any open receiver channel using a Futaba J connector


Includes: One VoltWatch2 on-board receiver battery monitor with Futaba J plug and one 1.5x1 piece of double sided mounting tape

Requires: Plugging into any unused receiver port and mounting onto the airplane with double-sided tape

Specs:
Length: 1.65 (42mm)
Width: .63 (16mm)
Height: .16 (4mm)
Weight: .15oz (4.3 grams)
Current Draw: approx 4-34mA
Lead Length: 198mm (7.79)

Note: This has a Futaba J connector pre-installed. For radios other than Futaba, you will have to change or modify the plug.