TrakPower LiPo 4S 14.8V 5400mAh 50C Hard Case 4mm TKPC0385

TrakPower

https://www.rcplanet.com/batteries/battery-packs-surface/trakpower-lipo-4s-14-8v-5400mah-50c-hard-case-4mm-tkpc0385/
$149.99 $109.99
(You save $40.00)
Status: Out of stock
(No reviews yet)
UPC:
758241203857
Availability:
<span style="color: #D70200;"><strong>Unavailable</strong></span><br /><span style="color: #D70200;"><strong>Sandy, Utah</strong></span>

Item # TKPC0385

Battery Type:
LiPo
Plug Type:
Bullet Plug
Voltage:
14.8V
Car Parts:
Batteries
More information about TrakPower LiPo 4S 14.8V 5400mAh 50C Hard Case 4mm TKPC0385

This is the TrakPower 4S 14.8V 50C 5400mAh LiPo battery.

Features:

  • Hard plastic case
  • 4mm bullet connectors
  • ROAR approved


Includes: 4S 14.8V 50C 5400mAh LiPo Battery with 4mm Bullet Connectors, One set of 4mm male bullet connectors, JST XH Balancing Cable and Instruction Sheet

Requires: LiPo compatible charger such as the TrakPower VR-1 Dual Racing Charger or the Duratrax Onyx 225

Note: Always use a LiPo-approved charger, set charger to 3.7V per cell and set charger’s output volts to match battery volts. Be sure to charge in a fireproof location and keep out of the reach of children. Never charge over 4.2V per cell, charge at currents greater than 1C, allow discharging below 3.2V per cell or trickle charge. Do not disassemble or modify pack in any way, puncture cells, place on combustible materials or leave unattended during charging.

You Might Also Like...

You Might Also Like...

Overview

More information about TrakPower LiPo 4S 14.8V 5400mAh 50C Hard Case 4mm TKPC0385

This is the TrakPower 4S 14.8V 50C 5400mAh LiPo battery.

Features:

  • Hard plastic case
  • 4mm bullet connectors
  • ROAR approved


Includes: 4S 14.8V 50C 5400mAh LiPo Battery with 4mm Bullet Connectors, One set of 4mm male bullet connectors, JST XH Balancing Cable and Instruction Sheet

Requires: LiPo compatible charger such as the TrakPower VR-1 Dual Racing Charger or the Duratrax Onyx 225

Note: Always use a LiPo-approved charger, set charger to 3.7V per cell and set charger’s output volts to match battery volts. Be sure to charge in a fireproof location and keep out of the reach of children. Never charge over 4.2V per cell, charge at currents greater than 1C, allow discharging below 3.2V per cell or trickle charge. Do not disassemble or modify pack in any way, puncture cells, place on combustible materials or leave unattended during charging.

Product Questions