More information about Castle Creations 1/18 Mamba Micro X Car ESC with Motor CSE010-0147-03
This is the Castle Creations Mamba Micro X waterproof electronic speed control with the 0808-8200Kv brushless motor.
- Mamba Micro ESC
- 0808 8200Kv Motor with 3.5mm Female Bullet Connectors
- Motor Leads with 3.5mm Male Bullet Connectors
- Pre-tinned Battery Leads (require connector to mate with selected battery, 4mm Castle Creations connectors recommended)
- On/Off Switch
- Receiver Connector
- Instruction Booklet
- Voucher for free Castle Creations Programmer
Requires: Compatible LiPo Battery, recommended battery capacity for 1/18 scale vehicles is 1500mAh, 30C or higher continuous discharge and pinion and spur gear depending on application
Note: Not intended for operation while submerged in liquid. If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit.
Specifications for Castle Creations 1/18 Mamba Micro X Car ESC with Motor CSE010-0147-03
|Motors & Accessories|
- For 1/18 scale 2 or 4 wheel drive vehicles weighing up to 2.25lbs (1.02kg)
- Heavy-duty BEC (battery eliminator circuit) handles high-draw digital servos
- Adjustable settings include: Throttle, Punch Control, Braking Curve, Reverse Type, Drag Brake, Motor Type and Auto LiPo Cutoff
- Profiles can be custom designed on a PC with the Castle Link PC programming software (software not included, can be downloaded for free from Castle's website, voucher is included for free Castle Link Programmer)
- Programmable Auxiliary Wire (AUX) allows adjustments to several settings such as torque control and max throttle from a compatible transmitter
- Ideal for on and off road applications running up to 2S LiPo’s, and weighing up to 2.5lbs (1134g)
- 4 Pole brushless, Sensorless design
Input Voltage Range: Min. 2S LiPo, Max. 3S, 12.6V
BEC Specifications: Adjustable: 5.5V or 7.5V (2A Peak), default 5.5V
Reversible: Yes, with lockout
On/Off Switch: Waterproof
Dimensions: 1.61x0.75x1.10" (41x19x28mm)
Weight: 1.20oz (34.01g) without connector
Maximum Input Voltage: 2S LiPo
Maximum Operating Temperature: 180°F (82°C)
Motor Size: 1.5x0.79" (38x20mm)
Shaft Diameter: 0.08" (2mm)
Weight: 1.8oz (50g)
Mounting Hole: 1/2" 14mm, 5/8"
Connectors: 3.5mm gold female
Reviews for Castle Creations 1/18 Mamba Micro X Car ESC with Motor CSE010-0147-03
No customer reviews for the moment.
Questions and answers about Castle Creations 1/18 Mamba Micro X Car ESC with Motor CSE010-0147-03
If used in a Traxxas SST, will it still work with the Latrax/Traxxas remote ?
Yes, this brushless ESC and motor will work with the Traxxas transmitter. We would recommend a lower KV motor for that truck (part #CSE010-0147-02) you also would need to solder the Traxxas battery plug to this ESC.
Will this fit an ECX 1/18 scale torment?
Yes this will fit perfectly in a 1/18th ECX, you would need to solder on the battery plug but other than that is should be an easy swap.
Will this fit the Tamiya Tamtech 1/12th Porshe? The motor for car is 370 size. Thank you!
Yes this will be a great brushless upgrade for your Tamtech RC.
Will it fit the Latrax Teton?
Yes this system will fit in the Teton but the kv rating might be a bit to high for it. We would recommend the 4100 or the 5300 kv.
Would this be a possible to upgrade for a Team Associated 1:18 RC18B. I am concern about motor mount issues. Thanks in advance.
Yes, that speed control combo will fit in the RC18B without having to change the motor mount.