Give your 1/10 scale crawler the power it needs to take on any challenge with the Mamba X 25.2V waterproof ESC and 1406-2850kV sensored motor from Castle Creations. The Mamba X is extremely versatile, capable of power a wide variety of applications ranging from 2S to 6S and vehicles ranging from 1/10th scale to 1/8th scale. Whether you're racing at the track with your 2WD buggy, bashing through the puddles and mud in your SCT or monster truck, or navigating a hardcore crawling excursion, this ESC raises the bar to a whole new level.
ESC's have it rough - landing extreme jumps, experiencing accidental collisions, and splashing through the occasional puddle. As RC enthusiasts themselves, Castle engineers understand this and designed the Mamba X to endure these situations and power through them. It is housed in a rugged CNC-machined aluminum case and then potted in waterproof epoxy. This not only protects the electronics but ensures any heat generated in the controller can easily be dissipated through the case.
The high-performance Mamba X includes an integrated and powerful 8A adjustable BEC and can push the most extreme 1/10th scale setups and 1/8th scale race buggies. SmartSense allows you to take advantage of smooth, cog-free, and predictable sensored starts, and Castle's new and improved throttle response keeps you ahead of the competition.
1x Mamba X Electronic Speed Controller
1x 1406-2850kv Sensored Brushless Motor
1x 210mm length sensor wire (for sensored operation)
1x Castle Sensor Harness Adapter
1x Coupon for free Castle Link USB adapter
1x Driver's Ed and Quick Start Guides
1x Castle decal sheet
- Wide 2S to 6S input voltage range
- Sensored motor support (Castle X-series sensor harness included)
- 8A adjustable BEC (5.25V - 8V)
- Rugged CNC machined aluminum case
- Castle Link programming support
- SmartSense enabled for peak performance
- Integrated Capacitors
- Removable 30mm cooling fan
- Integrated 4mm bullet connectors
- 12 AWG power wires
- Waterproof switch
- Audible alerts
Input Voltage Range: 2S - 6S LiPo (25.2V)
BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V
Operating Environment: Waterproof* design allows for use in nearly any environment.
Reversible: Yes, but may be disabled for racing.
On/Off Switch: Yes
Cooling Fan: Yes, factory equipped (30mm), fully removable** (see Product Use Statements below)
Length: 2.14" (54.4mm)
Width: 1.39" (35.2mm)
Height: 1.18" (30.0mm)
Weight (with wires): 3.56 oz. (101g)
Connectors: 4.0mm female bullets for motor connection.
Max. Recommended Vehicle Weight: Less than 9lbs, with batteries, ready-to-run with included 1406 -2850kv motor in low-speed crawlers; 5lbs maximum for more aggressive setups like rock racing and extended hill climbing
Input Voltage Range: 2S-4S LiPo
Max. RPM: 100,000
Weight (with wires): 197 g / 6.9oz
Shaft Length: 15mm
Shaft Diameter: 1/8" (3.17mm)
Mounting Hole Specifications: M3 @ 25mm
Connectors: 4mm male Castle Bullet Connectors
Max. Recommended Vehicle Weight: 9lbs when used for low speed/moderate driving style like rock crawling and trail running; 5lbs for more racing and aggressive driving styles.
*Although the Mamba X is waterproof, it is not intended for operation while completely submerged in liquid. T Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio, and chassis are also waterproof before exposing them to liquids of any kind.
**The cooling fan must be removed prior to driving in wet conditions. It is not waterproof.
This product was added to our catalog on July 17, 2017