CEN Racing B50 4WD Solid Axle 1/10 Ford RTR Monster Truck CEGB50

CEN Racing

https://www.rcplanet.com/cen-racing-b50-4wd-solid-axle-1-10-ford-rtr-monster-truck-cegb50/
$329.00
Status: Out of stock
(No reviews yet)

Item # CEGB50

More information about CEN Racing B50 4WD Solid Axle 1/10 Ford RTR Monster Truck CEGB50

This is the CEN Racing B50 4WD solid axle 1/10 scale RTR Ford monster truck. Based on a real truck, this is an officially licensed 1979 Ford F600 crew cab front end with a 1979 Bronco rear! The headlights and light bar have built in buckets, and are 3mm LED ready! Wheelie bar included. Hobbywing 40A waterproof ESC & Savox servo are standard. A realistic full roof rack and side mirrors are some of the awesome details and killer innovations.


ESC -40A WP-1040-Brushed (Powered by HOBBYWING):
  • Water-proof and dust-proof for all weather
  • Built-In Capacitor Module
  • Automatic throttle range calibration
  • Low voltage cut-off protection for Li-Po (lithium polymer) and NiMH battery
  • Over-Heat protection and throttle signal loss protection
  • Easily programmed with jumpers

Motor -RS-550 High Torque Motor (Powered) By Mabuchi Motor

Servo -12Kg Servo (O.E.M. by Savox):

  • 4.8V 0.26 sec/60deg, 10.0 kg-cm
  • 6.0V 0.23 sec/60deg, 12.0 kg-cm
  • 25T Horn Gear Spline

Radio System - Pistol-Grip Mod-3S 3 Channel Transmitter:

  • Digital Trimming
  • Steering Dual-Rate (ST D/R) Adjustment
  • End Point Adjustment (EPA)
  • Build in Failsafe
  • Power Alarm Transmitter Model #: 82190 Frequencies: 2.4GHz

Chassis:

  • DVP (Dual Vertical Plate) Chassis Design
  • Sealed Receiver Compartment
  • Easy Access/Quick Release Battery Tray
  • Battery Tray Size 146x50x25mm
  • Adjustable Wheelie Bar Ready (w/Ball Bearing)
  • Full Precision Ball Bearing Support
  • Adjustable Turnbuckles -Harden Steel Steering Drag Link
  • Fully Equipped with Allen Hex Screws
  • Adjustable Body Post
  • High Torque Servo Saver
  • Optional 4-Wheel Steering Design

Suspension:

  • Sway Bar and Wheelie Bar Included
  • 8 Big Bore Oil Filled Coil Over Shocks
  • Aluminum Anodized Shock Caps -10mm over size shock body with 3mm hardened steel polished shaft
  • Stiff Hard Racing Spring
  • Fixed Wheelbase Ride Height Adjustable with pre-load
  • Realistic 4-Link Suspension design

Drivetrain:

  • Slipper Drive System
  • 4 Wheel Drive
  • Center Shaft Drive Train for more power transferred to the wheels
  • Hight Efficient Transmission System
  • Wide Range Easy Changeable Gear Box Design
  • Sealed transmission eliminates dirt and dust substances to get in
  • Sealed Axle housing
  • 5mm Hardened Steel Axle shaft
  • Differential Center Locker Front/Rear Planetary Gear Type
  • Ring & Pinion 30/15T

Length: 16inch (405mm)
Width: 12.20inch (310mm)
Wheelbase: 10.82inch (275mm)
Ground Clearance: 3.14inch (80mm)
Weight: 4.85 lb. 2.2kg
Deep Dish 2.2-inch (55mm) Monster Truck Wheels, V-Pattern Tire 55x136x74mm

You Might Also Like...

You Might Also Like...

Overview

More information about CEN Racing B50 4WD Solid Axle 1/10 Ford RTR Monster Truck CEGB50

This is the CEN Racing B50 4WD solid axle 1/10 scale RTR Ford monster truck. Based on a real truck, this is an officially licensed 1979 Ford F600 crew cab front end with a 1979 Bronco rear! The headlights and light bar have built in buckets, and are 3mm LED ready! Wheelie bar included. Hobbywing 40A waterproof ESC & Savox servo are standard. A realistic full roof rack and side mirrors are some of the awesome details and killer innovations.


ESC -40A WP-1040-Brushed (Powered by HOBBYWING):
  • Water-proof and dust-proof for all weather
  • Built-In Capacitor Module
  • Automatic throttle range calibration
  • Low voltage cut-off protection for Li-Po (lithium polymer) and NiMH battery
  • Over-Heat protection and throttle signal loss protection
  • Easily programmed with jumpers

Motor -RS-550 High Torque Motor (Powered) By Mabuchi Motor

Servo -12Kg Servo (O.E.M. by Savox):

  • 4.8V 0.26 sec/60deg, 10.0 kg-cm
  • 6.0V 0.23 sec/60deg, 12.0 kg-cm
  • 25T Horn Gear Spline

Radio System - Pistol-Grip Mod-3S 3 Channel Transmitter:

  • Digital Trimming
  • Steering Dual-Rate (ST D/R) Adjustment
  • End Point Adjustment (EPA)
  • Build in Failsafe
  • Power Alarm Transmitter Model #: 82190 Frequencies: 2.4GHz

Chassis:

  • DVP (Dual Vertical Plate) Chassis Design
  • Sealed Receiver Compartment
  • Easy Access/Quick Release Battery Tray
  • Battery Tray Size 146x50x25mm
  • Adjustable Wheelie Bar Ready (w/Ball Bearing)
  • Full Precision Ball Bearing Support
  • Adjustable Turnbuckles -Harden Steel Steering Drag Link
  • Fully Equipped with Allen Hex Screws
  • Adjustable Body Post
  • High Torque Servo Saver
  • Optional 4-Wheel Steering Design

Suspension:

  • Sway Bar and Wheelie Bar Included
  • 8 Big Bore Oil Filled Coil Over Shocks
  • Aluminum Anodized Shock Caps -10mm over size shock body with 3mm hardened steel polished shaft
  • Stiff Hard Racing Spring
  • Fixed Wheelbase Ride Height Adjustable with pre-load
  • Realistic 4-Link Suspension design

Drivetrain:

  • Slipper Drive System
  • 4 Wheel Drive
  • Center Shaft Drive Train for more power transferred to the wheels
  • Hight Efficient Transmission System
  • Wide Range Easy Changeable Gear Box Design
  • Sealed transmission eliminates dirt and dust substances to get in
  • Sealed Axle housing
  • 5mm Hardened Steel Axle shaft
  • Differential Center Locker Front/Rear Planetary Gear Type
  • Ring & Pinion 30/15T

Length: 16inch (405mm)
Width: 12.20inch (310mm)
Wheelbase: 10.82inch (275mm)
Ground Clearance: 3.14inch (80mm)
Weight: 4.85 lb. 2.2kg
Deep Dish 2.2-inch (55mm) Monster Truck Wheels, V-Pattern Tire 55x136x74mm

Product Questions