CEN Racing Hyper Lube Solid Axle 1/10 Scale RTR Monster Truck CEGHL150

CEN Racing

https://www.rcplanet.com/cen-racing-hyper-lube-solid-axle-1-10-scale-rtr-monster-truck-ceghl150/
$299.00
Status: Out of stock
(No reviews yet)

Item # CEGHL150

More information about CEN Racing Hyper Lube Solid Axle 1/10 Scale RTR Monster Truck CEGHL150

This is the CEN Racing Hyper Lube solid axle 1/10 scale RTR monster truck.

ESC-40A WP-1040-Brushed (Powered by HobbyWing):

  • Water-proof and dust-proof for all weather
  • Built-In Capacitor Module
  • Automatic throttle range calibration
  • Low voltage cut-off protection for Li-Po (lithium polymer) and NiMH battery
  • Over-Heat protection and throttle signal loss protection
  • Easily programmed with jumpers

Motor -RS-550 High Torque Motor -Powered By Mabuchi Motor

Servo -12Kg Servo O.E.M. by Savox:

  • 4.8V 0.26 sec/60deg 10.0 kg-cm
  • 6.0V 0.23 sec/60deg 12.0 kg-cm
  • 25T Horn Gear Spline

Radio System:

  • Pistol-Grip Mod-3S 3 Channel Transmitter
  • Digital Trimming
  • Steering Dual-Rate (ST D/R) Adjustment
  • End Point Adjustment (EPA)
  • Built in Failsafe

Power Alarm Chassis:

  • DVP (Dual Vertical Plate) Chassis Design
  • Sealed Receiver Compartment
  • Easy Access/Quick Release Battery Tray
  • Battery Tray Size 146x50x25mm
  • Adjustable Wheelie Bar Ready (w/Ball Bearing)
  • Full Precision Ball Bearing Support
  • Adjustable Turnbuckles -Harden Steel Steering Drag Link
  • Fully Equipped with Allen Hex Screws
  • Adjustable Body Post
    - High Torque Servo Saver
  • Optional 4-Wheel Steering Design

Suspension:

  • 8 Big Bore Oil Filled Coil Over Shocks
  • Aluminum Anodized Shock Caps
  • 10mm over size shock body
  • 3mm hardened steel polished shaft
  • Stiff Hard Racing Spring
  • Fixed Wheelbase
  • Ride Height- Adjustable with pre-load
  • Realistic 4-Link Suspension design

Drivetrain:

  • Sway bar & wheelie bar included
  • 4 Wheel Drive
  • Center Shaft Drive Train for more power transferred to the wheels
  • Highly Efficient Transmission System
  • Wide Range Easy Changeable Gear Box Design
  • Sealed transmission eliminates dirt and dust
  • Sealed Axle housing
  • 5mm Hardened Steel Axle shaft
  • Differential Center Locker Front/Rear Planetary Gear Type
  • Ring & Pinion 30/15T

Length: 16inch (405mm)
Width: 12.20inch (310mm)
Wheelbase: 10.82inch (275mm)
Ground Clearance: 3.14inch (80mm)
Weight: 4.85 lb. 2.2kg
Wheel: Deep Dish 2.2-inch (55mm) Monster Truck Wheel Tires: Monster Truck V-Pattern Tire 55x136x74mm

 

You Might Also Like...

You Might Also Like...

Overview

More information about CEN Racing Hyper Lube Solid Axle 1/10 Scale RTR Monster Truck CEGHL150

This is the CEN Racing Hyper Lube solid axle 1/10 scale RTR monster truck.

ESC-40A WP-1040-Brushed (Powered by HobbyWing):

  • Water-proof and dust-proof for all weather
  • Built-In Capacitor Module
  • Automatic throttle range calibration
  • Low voltage cut-off protection for Li-Po (lithium polymer) and NiMH battery
  • Over-Heat protection and throttle signal loss protection
  • Easily programmed with jumpers

Motor -RS-550 High Torque Motor -Powered By Mabuchi Motor

Servo -12Kg Servo O.E.M. by Savox:

  • 4.8V 0.26 sec/60deg 10.0 kg-cm
  • 6.0V 0.23 sec/60deg 12.0 kg-cm
  • 25T Horn Gear Spline

Radio System:

  • Pistol-Grip Mod-3S 3 Channel Transmitter
  • Digital Trimming
  • Steering Dual-Rate (ST D/R) Adjustment
  • End Point Adjustment (EPA)
  • Built in Failsafe

Power Alarm Chassis:

  • DVP (Dual Vertical Plate) Chassis Design
  • Sealed Receiver Compartment
  • Easy Access/Quick Release Battery Tray
  • Battery Tray Size 146x50x25mm
  • Adjustable Wheelie Bar Ready (w/Ball Bearing)
  • Full Precision Ball Bearing Support
  • Adjustable Turnbuckles -Harden Steel Steering Drag Link
  • Fully Equipped with Allen Hex Screws
  • Adjustable Body Post
    - High Torque Servo Saver
  • Optional 4-Wheel Steering Design

Suspension:

  • 8 Big Bore Oil Filled Coil Over Shocks
  • Aluminum Anodized Shock Caps
  • 10mm over size shock body
  • 3mm hardened steel polished shaft
  • Stiff Hard Racing Spring
  • Fixed Wheelbase
  • Ride Height- Adjustable with pre-load
  • Realistic 4-Link Suspension design

Drivetrain:

  • Sway bar & wheelie bar included
  • 4 Wheel Drive
  • Center Shaft Drive Train for more power transferred to the wheels
  • Highly Efficient Transmission System
  • Wide Range Easy Changeable Gear Box Design
  • Sealed transmission eliminates dirt and dust
  • Sealed Axle housing
  • 5mm Hardened Steel Axle shaft
  • Differential Center Locker Front/Rear Planetary Gear Type
  • Ring & Pinion 30/15T

Length: 16inch (405mm)
Width: 12.20inch (310mm)
Wheelbase: 10.82inch (275mm)
Ground Clearance: 3.14inch (80mm)
Weight: 4.85 lb. 2.2kg
Wheel: Deep Dish 2.2-inch (55mm) Monster Truck Wheel Tires: Monster Truck V-Pattern Tire 55x136x74mm

 

Product Questions